This is the best place to exchange flight plans and flight tracks...
Moderators: Uros, Tom, OXO
-
Aslan
- Posts: 61
- Joined: Mon Oct 27, 2008 5:18 pm
- Location: Bristol, England
Post
by Aslan » Mon Jan 26, 2009 8:38 pm
I would like to use Condor to create a task of my own. I tried to do this by selecting "Flight Planner"/ "New", under "Landscape" I selected Alpi3[3.1]. Under the "Weather" tab I was able to create my choice of weather.
Under the "task" tab, I could not create task points. How is this done?
I would be grateful for help
John
-
BOD1
- Posts: 2144
- Joined: Mon Aug 07, 2006 2:45 pm
- Location: Brittany, France
-
Contact:
Post
by BOD1 » Mon Jan 26, 2009 8:49 pm
Did you RTFM?
Please use this button to send me a PM, Forum messaging is too limited.
-
Aslan
- Posts: 61
- Joined: Mon Oct 27, 2008 5:18 pm
- Location: Bristol, England
Post
by Aslan » Mon Jan 26, 2009 10:10 pm
Well, I did, but obviously from what you say, the answer to my question is there but i missed it
-
BOD1
- Posts: 2144
- Joined: Mon Aug 07, 2006 2:45 pm
- Location: Brittany, France
-
Contact:
Post
by BOD1 » Mon Jan 26, 2009 10:17 pm
1) Click on an airport
2) move your mouse around (you will see a blue line) and click again to define the TP
3) repeat 2 ad nauseam
4) right click and choose "finish task"
Please use this button to send me a PM, Forum messaging is too limited.
-
Aslan
- Posts: 61
- Joined: Mon Oct 27, 2008 5:18 pm
- Location: Bristol, England
Post
by Aslan » Mon Jan 26, 2009 11:03 pm
I found it all in the manual - page 14 of 44. I created a beginners task and flew it.
Most enjoyable
Thanks again
John