Test your server connection and 'reachability'
Good - so why does the test connection webpage say my host is unreachable?
Obviously I'm not too worried about this since the important thing is that I can successfully host a condor server. However I am concerned that this tool could cause people to spend a lot of time and trouble trying to fix a problem that doesn't exist.
Obviously I'm not too worried about this since the important thing is that I can successfully host a condor server. However I am concerned that this tool could cause people to spend a lot of time and trouble trying to fix a problem that doesn't exist.
- RAF_Chalky
- Posts: 27
- Joined: Fri May 18, 2007 7:56 pm
- Location: Dorset UK
- Contact:
new fiberglas connection but host not found
hello hope for some tips @ moment.
I've got my new fiber glas internet connection this week.
I would like to use the 10/5 Mbit connection to host my coming competitions on condor club database.
I got a new modem Zyxel P-800 and a new router Sphairon Turbolink 7211
I got internet connection right now but hostin dedicated servers with DSHelper does not work anymore: host not found.
For a few tests i disabeld windows vista 32bit firewall and the firewall in the router.
I set up the portforwadings and gave a fixed IP to the computer hosting the servers.
Condor recognizes correct public IP and ports but cant connect.
I did it the same way with my old fritzbox 7170.
Dont know whats goin wrong, the provider actualy has no idea.
I'm going to have try get my FritzBox workin again. I'm not sure if its ready for VDSL2
I get it @ friday to run a test.
I fowarded different ports to test. I did it on the same system with the Fritz Box @ UDP & TCP ports 56281, 56282 & 56283
I also tried ports below 9999 and dont know what else i could do to make it. Any idea?
cya
iron
I've got my new fiber glas internet connection this week.
I would like to use the 10/5 Mbit connection to host my coming competitions on condor club database.
I got a new modem Zyxel P-800 and a new router Sphairon Turbolink 7211
I got internet connection right now but hostin dedicated servers with DSHelper does not work anymore: host not found.
For a few tests i disabeld windows vista 32bit firewall and the firewall in the router.
I set up the portforwadings and gave a fixed IP to the computer hosting the servers.
Condor recognizes correct public IP and ports but cant connect.
I did it the same way with my old fritzbox 7170.
Dont know whats goin wrong, the provider actualy has no idea.
I'm going to have try get my FritzBox workin again. I'm not sure if its ready for VDSL2
I get it @ friday to run a test.
I fowarded different ports to test. I did it on the same system with the Fritz Box @ UDP & TCP ports 56281, 56282 & 56283
I also tried ports below 9999 and dont know what else i could do to make it. Any idea?
cya
iron
- RAF_Chalky
- Posts: 27
- Joined: Fri May 18, 2007 7:56 pm
- Location: Dorset UK
- Contact:
~S~ Bod1,
To test your server connection and ensure it is reachable
from internet, you can use this form pre-filled with your IP
address. IP:
Port:
"Condor server found: RAF Chalky - Training"
Merci!!
To test your server connection and ensure it is reachable
from internet, you can use this form pre-filled with your IP
address. IP:
Port:
"Condor server found: RAF Chalky - Training"
Merci!!
"A checkride ought to be like a skirt, short enough to be interesting but still be long enough to cover everything."
You only need to forward UDP port specified in your server configuration.eisenhans wrote:I fowarded different ports to test. I did it on the same system with the Fritz Box @ UDP & TCP ports 56281, 56282 & 56283
Using your local IP (192.168.x.x or 10.x.x.x or ...) ?BOD1 wrote:Can you connect on your server locally?
BOD1 wrote:Just to be sure: did you start Condor *server* before doing the test?
Can you connect on your server locally?
I started DS Helper and 3 Condor Dedicated Servers for test.
Tryed out different ports. I would like to run 3 servers same time.
So I need to forward 3 Ports I think.
I specified them in DSHelper before.
DSHelper was running correct and recognized CTDB Tasks.
The 3 Server windows were hidden but opend.
The servers were listed @ condor server list.
I did not try to reach Servers by using local IP.
Im goin to try today. Good idea.
[/quote]You only need to forward UDP port specified in your server configuration.[/quote]
Ok i did not know that. I always forwarded TCP & UDP but that should not be the problem. It worked before....
Hmmm.....this is strange. Your connection test tool now tells me that everything is fine. I did not make a chenge in settings....
I can connect from the PC hosting the server via local IP but
for me there still appears host not found when i try to join by public IP.
I recognized few other pilots who seem to be able to join.
I stay online with the servers now.
Would be nice to get some feedback if ure able to join.
They're called Iron ridgERace leaguE -CSX-
thx
iron
I can connect from the PC hosting the server via local IP but
for me there still appears host not found when i try to join by public IP.
I recognized few other pilots who seem to be able to join.
I stay online with the servers now.
Would be nice to get some feedback if ure able to join.
They're called Iron ridgERace leaguE -CSX-
thx
iron