DSHelper - Current Version 2.6.7.0 - Release date 20.03.2012
Re: DSHelper - Current Version 2.6.4.0 - Release date 24.03.2010
Marek, do you use language file within condor?
Re: DSHelper - Current Version 2.6.4.0 - Release date 24.03.2010
I tested DSHelper with Condor in german and czech and looks good. Only the logmail stuff gives me a error.
- FTP connection does not work, I get msg about doesnt exist directory also in case when value is blank - (works for me)
- DSH FTP settings do not accept values from *.dsh and always use default values - (have to test this - in my test case i only used dsh settings - there were no main settings)
- e-mail settings does not accept any address (IP or hostname). I use same settings as in previous versions, where these settings worked (i got some other error)
- DSH does not show values like (leader, flown distance etc.) - (works everytime for me)
- DSH optional and reapeating msgs dont work - (works too)
- FTP connection does not work, I get msg about doesnt exist directory also in case when value is blank - (works for me)
- DSH FTP settings do not accept values from *.dsh and always use default values - (have to test this - in my test case i only used dsh settings - there were no main settings)
- e-mail settings does not accept any address (IP or hostname). I use same settings as in previous versions, where these settings worked (i got some other error)
- DSH does not show values like (leader, flown distance etc.) - (works everytime for me)
- DSH optional and reapeating msgs dont work - (works too)
Re: DSHelper - Current Version 2.6.4.0 - Release date 24.03.2010
Hi Hitzi,
I have a small request for the next version if it will be posibile.
Having the condor server on the network i usually only replace the fpl with the new one.
Doing so, DSHelper doesn't refresh task data when starting the server next time. (Not even if i stop and start the server again from UI). Last week some of the guys got wrong 'taskinfo' until i restarted DSHelper.
Thanks in advance for any help.
I have a small request for the next version if it will be posibile.
Having the condor server on the network i usually only replace the fpl with the new one.
Doing so, DSHelper doesn't refresh task data when starting the server next time. (Not even if i stop and start the server again from UI). Last week some of the guys got wrong 'taskinfo' until i restarted DSHelper.
Thanks in advance for any help.
CN: MAC
Romanian weekly tasks
Romanian weekly tasks
Re: DSHelper - Current Version 2.6.4.0 - Release date 24.03.2010
Another small question.
All my servers report smaller 'flown distance' to the alternative serverlists. (right now one server reports 38km in official serverlist and 17km in mine and yours, after a few minutes, 119 in official, 64 in alternative).
In DSHelper window the distance is correct (same as in official serverlist)
There is no delay set on the alternative serverlist config.
Any idea why is this happening?
All my servers report smaller 'flown distance' to the alternative serverlists. (right now one server reports 38km in official serverlist and 17km in mine and yours, after a few minutes, 119 in official, 64 in alternative).
In DSHelper window the distance is correct (same as in official serverlist)
There is no delay set on the alternative serverlist config.
Any idea why is this happening?
CN: MAC
Romanian weekly tasks
Romanian weekly tasks
Re: DSHelper - Current Version 2.6.4.0 - Release date 24.03.2010
Hi Mac,
sorry for the late reply. How and when do you replace the fpl?
sorry for the late reply. How and when do you replace the fpl?
Re: DSHelper - Current Version 2.6.4.0 - Release date 24.03.2010
My DSH is crashing after couple days (Windows "DSH will be shut down..."). CDS remains open but task not running. There are some CDS messages stacked up, I'll try to make note of them if it happens again.
Extra Debug has made a file so large I can't open it...547 mb!
Windows XP SP3
Extra Debug has made a file so large I can't open it...547 mb!
Windows XP SP3
Re: DSHelper - Current Version 2.6.4.0 - Release date 24.03.2010
The extra debug would be great. Can you try to zip it? It's only text so the compression can big big.
Re: DSHelper - Current Version 2.6.4.0 - Release date 24.03.2010
I replace the fpl's every monday, just by replacing the files via network mapped drive.hitzi wrote:Hi Mac,
sorry for the late reply. How and when do you replace the fpl?
Now after this step i have to close all servers and restart DSHelper to fetch the new data. (if not the fpl on the server is ok, but 'taskinfo' command shows the previous task info).
Any ideea on the other issue? It seems that even if i don't have any delay set on the serverlist info, there is a big delay in displaying the km flown in the alternative server lists.
CN: MAC
Romanian weekly tasks
Romanian weekly tasks
Re: DSHelper - Current Version 2.6.4.0 - Release date 24.03.2010
David, do you have the detailed log (debug log) all the time enabled? If this is the case I think I know what's wrong.
Mac, so you have a list for example with flight1.fpl, flight2.fpl, flight3.fpl and when you replace them you simply upload a new flight1.fpl, flight2.fpl and flight3.fpl and overwrite the old ones, right? I changed the behavior fof the serverlist in dsh a bit. I'll send you a new version of the dsh later this week so you can test if the distance problem is gone.
Mac, so you have a list for example with flight1.fpl, flight2.fpl, flight3.fpl and when you replace them you simply upload a new flight1.fpl, flight2.fpl and flight3.fpl and overwrite the old ones, right? I changed the behavior fof the serverlist in dsh a bit. I'll send you a new version of the dsh later this week so you can test if the distance problem is gone.
Re: DSHelper - Current Version 2.6.4.0 - Release date 24.03.2010
exactly,i use this only because i'm lasy to go to the madiacenter and change the tasks manualyhitzi wrote: so you have a list for example with flight1.fpl, flight2.fpl, flight3.fpl and when you replace them you simply upload a new flight1.fpl, flight2.fpl and flight3.fpl and overwrite the old ones, right?
I'm very curious, because i didn't see any other online server with those problem, i thought it may be something on my side.hitzi wrote: I changed the behavior fof the serverlist in dsh a bit. I'll send you a new version of the dsh later this week so you can test if the distance problem is gone.
CN: MAC
Romanian weekly tasks
Romanian weekly tasks
Re: DSHelper - Current Version 2.6.4.0 - Release date 24.03.2010
I'm not exactly sure...hitzi wrote:David, do you have the detailed log (debug log) all the time enabled? If this is the case I think I know what's wrong.
On Program page, I do NOT have "Write debug informations to a logfile" checked. Although I did for the couple days to generate the file I posted, then turned it off.
On Logfile page, I have "Save DSHelper logfile" checked, but nothing else checked on that page.
But in the DSHelper.ini file, there is this:
[Options]
WriteDebugLogfile=0
DetailedDebugInfos=1
ClearDebugLogfile=0
[Logfile]
Enabled=1
SaveEventsOnly=0
SaveAsCSV=0
DontSaveEmptyLogfiles=0
Re: DSHelper - Current Version 2.6.4.0 - Release date 24.03.2010
As long as WriteDebugLogfile is null no debug file is written. The section [Logfile] is used by the Settings/Logfile part of the options and this are just the logfiles from the flight.
If you didn't had the "Write debug informations to a logfile" and "Save detailed informations" option activated when you got the error then it's another problem than I thought.
If you didn't had the "Write debug informations to a logfile" and "Save detailed informations" option activated when you got the error then it's another problem than I thought.
Re: DSHelper - Current Version 2.6.4.0 - Release date 24.03.2010
Another crash this morning, but I don't have any logging turned on.
Some pics to illustrate the timing:
CrashState.jpg
DSH crashed, CDS still open, but task not runni.
last entry in Server log:
"Dedicated server restarting"
RaceResult and FPL written at 05/11/2010 8:50 AM
RestartDSH1.jpg
DSH reads in stacked Server logs starting from
"I.Crha connected."
and then restarted task
RestartDSH2.jpg
Basically same info
I'm not sure why "Aerotow launching procedure started." is sent twice.
Some pics to illustrate the timing:
CrashState.jpg
DSH crashed, CDS still open, but task not runni.
last entry in Server log:
"Dedicated server restarting"
RaceResult and FPL written at 05/11/2010 8:50 AM
RestartDSH1.jpg
DSH reads in stacked Server logs starting from
"I.Crha connected."
and then restarted task
RestartDSH2.jpg
Basically same info
I'm not sure why "Aerotow launching procedure started." is sent twice.
You do not have the required permissions to view the files attached to this post.