Hi everybody.
I have purchased a Pimax 5k+ helmet and I can´t get to mirror the audio from the Condor sim, like I had done easily with mi old Oculus Rift.
I use a bodyshaker device connected to the bottom of my simulation chair, and I can´t fly without that "feeling".
¿Has anybody managed to get it work, or knows how to do it?
Thanks.
Mirror audio on a Pimax 5k+ (for a bodyshaker device)
Re: Mirror audio on a Pimax 5k+ (for a bodyshaker device)
Hello, I don't own Condor 2 sim (yet) but considering to get it.. And I own Realteus Force Feel vibration cushions that can be used via Audio input.. And I own Pimax 5k+.
There are two alternative that you can try:
You can use SteamVR => Settings => Audio => activate headset audio and set the audio output that you are planning to connect to bodyshaker as audio mirror. => This requires that you use SteamVR when flying with Condor 2 SW
Second alternative is to use virtual audio mixer program and route/split audio channels with that.
=> I use Voicemeeter (donationware: www.voicemeeter.com ) software where you can define 2 Hardware and 1 virtual input channels and 2 audio output channels => this should do the trick you need.
I used Voicemeeter with DCS (Simshaker for Aviator didn't support the Force Feel earlier) with good success.
There are two alternative that you can try:
You can use SteamVR => Settings => Audio => activate headset audio and set the audio output that you are planning to connect to bodyshaker as audio mirror. => This requires that you use SteamVR when flying with Condor 2 SW
Second alternative is to use virtual audio mixer program and route/split audio channels with that.
=> I use Voicemeeter (donationware: www.voicemeeter.com ) software where you can define 2 Hardware and 1 virtual input channels and 2 audio output channels => this should do the trick you need.
I used Voicemeeter with DCS (Simshaker for Aviator didn't support the Force Feel earlier) with good success.
Re: Mirror audio on a Pimax 5k+ (for a bodyshaker device)
Thanks, melodrama ¿are you spanish like me?
I have used the voicemeeter program and it works fine.
Now I have to "tinker" with the Pimax and Oculus options to improve the view with the Pimax.
I have used the voicemeeter program and it works fine.
Now I have to "tinker" with the Pimax and Oculus options to improve the view with the Pimax.
Re: Mirror audio on a Pimax 5k+ (for a bodyshaker device)
Nope, I'm finnish..
Re: Mirror audio on a Pimax 5k+ (for a bodyshaker device)
I bought Condor2 yesterday and I just finished my first real tryout with my gears (CPU:i7-8700K, GPU:RTX 2080Ti, Pimax 5k+, MFG Crosswind pedals, Warthog throttle and Joystick, Realteus Force Feel cushion)
=> I'm impressed ! My gears worked pretty well with high graph setups. I flew about 1h; plane towing and thermals felt quite same than in real life (I have 150h overall flight time with real gliders over 15 years ago)
Next (read: tomorrow maybe) I will try to set my Force Feel cushions so that I connect the Pimax audio into Voicemeeter and connect the output audio channel via mixer into Force Feel cushions. I don't know how well this works, not necessary very well because I would like to feel the turbulence shaking (you cannot hear turbulence => audio-to-Force Feel conversion is not able to generate turbulence shaking effect)..
=> I'm impressed ! My gears worked pretty well with high graph setups. I flew about 1h; plane towing and thermals felt quite same than in real life (I have 150h overall flight time with real gliders over 15 years ago)
Next (read: tomorrow maybe) I will try to set my Force Feel cushions so that I connect the Pimax audio into Voicemeeter and connect the output audio channel via mixer into Force Feel cushions. I don't know how well this works, not necessary very well because I would like to feel the turbulence shaking (you cannot hear turbulence => audio-to-Force Feel conversion is not able to generate turbulence shaking effect)..