ASK21 (3D Models Submitted)

desktopsimmer · Post by **desktopsimmer** » Sun Oct 09, 2005 9:40 pm

Here are prelim sketches done this evening. Better quality will appear once I've bought an ASK21, a 1:32 scale model by Revel-Monogram

desktopsimmer · Post by **desktopsimmer** » Sun Oct 09, 2005 9:41 pm

part 2

mach_one_man · Post by **mach_one_man** » Sun Oct 09, 2005 10:22 pm

Looks great - will be nice to have a K21 - im making a K13 and after both are done that will be most of the gliders I fly done

Aal · Post by **Aal** » Mon Oct 10, 2005 7:13 pm

Hey you,
Great work so far. I'm longing to the day to fly a 21 and 13 in Condor.
But for me the rear Canopy looks to short.

check that please.

desktopsimmer · Post by **desktopsimmer** » Mon Oct 10, 2005 7:38 pm

These are just preliminary designs, just to see if I've still got the nack, its been a while since I've done planes as 3D models.

I have myself plenty of gripes with the current model. I'm looking for better drawing, photos etc to resolve queries that I have. Once I've got a plastic scale model, I'll throw some considerable time into this project. Hopefully 'the other half' will understand

Cumulus7 · Post by **Cumulus7** » Mon Oct 10, 2005 9:59 pm

If you need some real-life photos, just ask

We have severeal '21s at out airfield.

-Sven- · Post by **-Sven-** » Mon Oct 10, 2005 10:01 pm

desktopsimmer wrote:These are just preliminary designs, just to see if I've still got the nack, its been a while since I've done planes as 3D models.

I have myself plenty of gripes with the current model. I'm looking for better drawing, photos etc to resolve queries that I have. Once I've got a plastic scale model, I'll throw some considerable time into this project. Hopefully 'the other half' will understand

It's a begin

It's a bit an ASK21 and Twin 1

Good luck!

desktopsimmer · Post by **desktopsimmer** » Mon Oct 10, 2005 11:24 pm

@Cumulus7

Thanks

, That would help me a lot. Please could you get me several shots of the cockpits, landing gear, rear tail and canopy. I'm off to the club later next week, I don't know if I'll get time to photo our '21. I'm hoping to get something of the external 3D model by sometime next week.

Cumulus7 · Post by **Cumulus7** » Mon Oct 10, 2005 11:41 pm

if i get out to the airfield this week (which i doubt) i will make some photos..

bye
Markus

desktopsimmer · Post by **desktopsimmer** » Fri Oct 14, 2005 9:00 pm

Right got a ASK-21 (1:32 scaled) and I'll be building it this weekend. Hopefully, come monday I'll be starting the 3D Model in full production.

desktopsimmer · Post by **desktopsimmer** » Thu Oct 20, 2005 2:02 pm

Updated Model. Getting that scaled model has help, some minor adjustment required, but this the current model

KonFred · Post by **KonFred** » Thu Oct 20, 2005 2:47 pm

wow that looks really good

Dan · Post by **Dan** » Thu Oct 20, 2005 3:42 pm

it looks fantastic

tinpilot · Post by **tinpilot** » Thu Oct 20, 2005 10:10 pm

Looks excellent, especially the airfoil profile.

I'd lose the mainwheel fairing - most K21s already have IRL. (Bet it took you ages to do.)

Don't know how your program works but, looking at your previous posts, I'd delete the points halfway between the wing trailing edge and the fin, fill in the blank face and make one long extrusion to the end of the fuselage. The rear end of a K21 is a simple round tube.

I think your first model of the rear canopy was better (see attachment.)

Ed

TimKuijpers · Post by **TimKuijpers** » Thu Oct 20, 2005 11:03 pm

Keep the wheel-fairing

that's how we have it on our club.
I'm getting quite handy repairing them because they ain't that solid,
but it is stil a part of the ASK-21 wich you get when you buy it.