Ventus 3- Joystick too small

[GW_moin4640]

Hi Guys,
My favorite airplane is the Ventus 3 and i fly it a lot. And i have problem with the joystick. It is way too small. Can you change it so it have the size of the Ventus 3 in this video? https://youtu.be/iHsoNNlPqkk?si=Gu__JUruuzpl7pya

[arneh]

The same with the JS3, and I guess other gliders which use the LX stick. Very noticeable how small they are in VR.
Also flap and brake handles seem too small in JS3.

[wickid]

Hi Guys,
My favorite airplane is the Ventus 3 and i fly it a lot. And i have problem with the joystick. It is way too small. Can you change it so it have the size of the Ventus 3 in this video? https://youtu.be/iHsoNNlPqkk?si=Gu__JUruuzpl7pya

I measured our model against the values from the RemoteStick manual.

The model of the handgrip of the stick is 3mm shorter than the real one.

The same with the JS3, and I guess other gliders which use the LX stick. Very noticeable how small they are in VR.
Also flap and brake handles seem too small in JS3.

The one in the JS3 is actually exactly to scale with the drawings of the RemoteStick. 147 mm tall and 47 mm wide (I measured 46.525 mm in the model)

[GW_moin4640]

Hi Guys,
My favorite airplane is the Ventus 3 and i fly it a lot. And i have problem with the joystick. It is way too small. Can you change it so it have the size of the Ventus 3 in this video? https://youtu.be/iHsoNNlPqkk?si=Gu__JUruuzpl7pya

I measured our model against the values from the RemoteStick manual.

The model of the handgrip of the stick is 3mm shorter than the real one.

Means that you will change that?

[wickid]

Hi Guys,
My favorite airplane is the Ventus 3 and i fly it a lot. And i have problem with the joystick. It is way too small. Can you change it so it have the size of the Ventus 3 in this video? https://youtu.be/iHsoNNlPqkk?si=Gu__JUruuzpl7pya

I measured our model against the values from the RemoteStick manual.

The model of the handgrip of the stick is 3mm shorter than the real one.

Means that you wont change that?

Yep. The stick is (almost) the correct size. You are not going to notice if I change it by 3 mm.

[GW_moin4640]

Hi Guys,
My favorite airplane is the Ventus 3 and i fly it a lot. And i have problem with the joystick. It is way too small. Can you change it so it have the size of the Ventus 3 in this video? https://youtu.be/iHsoNNlPqkk?si=Gu__JUruuzpl7pya

But it isnt as big as this stick. Are there different Versions of the stick?

[Vertigo]

Of course there are different stick ends (like for LX or xcsoar); but the fish eye lens close to the stick just makes it appear gigantic.

[GW_moin4640]

Is this Joystick possible?

[wickid]

Is this Joystick possible?

It has that stick... Here I even matched the view for you:

It is made to scale EXACTLY like the real one.