Add LXNaV S100 to Panel

[N106T]

How do I add the S10 Vario to my plane? I Reproduced the look of my real sailplane panel in Condor and would like to make it 100%.
I have tried taking gage out of out planes with no luck.
Thanks

[arneh]

How do I add the S100 vario and LXNAV to my plane? I Reproduced the look of my real sailplane panel in Condor and would like to make it 100%.
I have tried taking gage out of out planes with no luck. Also any ideas why the runway is white in Moriaty NM USA

Thanks

[EVario]
FileName=EVario.c3d
PosX=1.4709997177124
PosY=0.0700000002980232
PosZ=-0.1056000048875809
Scale=0.900000190734863
a=0.40186
MaxValue=5
YAxisRotation=0.00999999977648258

Find a glider which has the S10, and replace EVario and FileName with those for the S10. It also requires a few more value for the speed values on the speed tape, so add those too.

[wickid]

Replace the entries for [Evario] and [Evario-i] with:

Code: Select all

[S10]
FileName=S10.c3d
PosX=1.46499943733215
PosY=-1.55521551192805E-8
PosZ=-0.146999999880791
Scale=0.800000190734863
a=0.42
MaxValue=5
YAxisRotation=0.0100000146776438
Screen=0
VS0=82
VS1=82
Vfe=170
Va=190
Vne=280

[S10-i]
FileName=S10-i.c3d
PosX=1.4709997177124
PosY=-1.55521551192805E-8
PosZ=-0.146999999880791
Scale=0.800000190734863
a=0.40186
MaxValue=5
YAxisRotation=0.170000016689301
Screen=0
VS0=54
VS1=54
Vfe=92
Va=103
Vne=151

To replace the original vario with the S10

[N106T]

Thank You for all the Help.

[FB-LS4]

Is there now the opportunity to change the position of the pda/lx given? I like to add the Lx into the Ls4 panel and remove the external mount.

[wickid]

Is there now the opportunity to change the position of the pda/lx given? I like to add the Lx into the Ls4 panel and remove the external mount.

No, the PDA is part of the 3D model and can only be modified by the Condor team.

[FB-LS4]

Oh ok, i thougt it would change with c3.
Thanks for the quick response

[FB-LS4]

I tried to replace the E-Vario of the LS4 with the V8 Vario. I took the "code" from the Ventus3 and placed it instead of the E Vario into the LS4a.gau file. I took everything from the Ventus except from the Coordinates of the Vario. These are the same from the original Ls4 E Vario. Im getting an error when i load into a flight with the ls4. (I did the same with the E-Vario-I)

Here is the error:
Access violation at address 0072AAC9 in module 'Condor.exe'. Read of address 00000090

Any ideas what i did wrong?
I took also a Screenshot from my LS4a.gau file.

[emdurigon]

Replace the entries for [Evario] and [Evario-i] with:

Code: Select all

[S10]
FileName=S10.c3d
PosX=1.46499943733215
PosY=-1.55521551192805E-8
PosZ=-0.146999999880791
Scale=0.800000190734863
a=0.42
MaxValue=5
YAxisRotation=0.0100000146776438
Screen=0
VS0=82
VS1=82
Vfe=170
Va=190
Vne=280

[S10-i]
FileName=S10-i.c3d
PosX=1.4709997177124
PosY=-1.55521551192805E-8
PosZ=-0.146999999880791
Scale=0.800000190734863
a=0.40186
MaxValue=5
YAxisRotation=0.170000016689301
Screen=0
VS0=54
VS1=54
Vfe=92
Va=103
Vne=151

To replace the original vario with the S10

Where? in the *glider*.gau file?

thanks

[6266]

yes, don't forget to backup the original files, and later your changed file, because an update will overwrite your file

[GlidingNico(NBE)]

Replace the entries for [Evario] and [Evario-i] with:

Code: Select all

[S10]
FileName=S10.c3d
PosX=1.46499943733215
PosY=-1.55521551192805E-8
PosZ=-0.146999999880791
Scale=0.800000190734863
a=0.42
MaxValue=5
YAxisRotation=0.0100000146776438
Screen=0
VS0=82
VS1=82
Vfe=170
Va=190
Vne=280

[S10-i]
FileName=S10-i.c3d
PosX=1.4709997177124
PosY=-1.55521551192805E-8
PosZ=-0.146999999880791
Scale=0.800000190734863
a=0.40186
MaxValue=5
YAxisRotation=0.170000016689301
Screen=0
VS0=54
VS1=54
Vfe=92
Va=103
Vne=151

To replace the original vario with the S10

I've tried to put the S10 also on the Ventus 3, but without success. Is this code only valid with the ASW19/20? How do we put the S10 in any glider?

[arneh]

Replace the entries for [Evario] and [Evario-i] with:

Code: Select all

[S10]
FileName=S10.c3d
PosX=1.46499943733215
PosY=-1.55521551192805E-8
PosZ=-0.146999999880791
Scale=0.800000190734863
a=0.42
MaxValue=5
YAxisRotation=0.0100000146776438
Screen=0
VS0=82
VS1=82
Vfe=170
Va=190
Vne=280

[S10-i]
FileName=S10-i.c3d
PosX=1.4709997177124
PosY=-1.55521551192805E-8
PosZ=-0.146999999880791
Scale=0.800000190734863
a=0.40186
MaxValue=5
YAxisRotation=0.170000016689301
Screen=0
VS0=54
VS1=54
Vfe=92
Va=103
Vne=151

To replace the original vario with the S10

I've tried to put the S10 also on the Ventus 3, but without success. Is this code only valid with the ASW19/20? How do we put the S10 in any glider?

The position will be different (and the speeds for the speed tape), but adapated it should work for any glider.

[GlidingNico(NBE)]

Replace the entries for [Evario] and [Evario-i] with:

Code: Select all

[S10]
FileName=S10.c3d
PosX=1.46499943733215
PosY=-1.55521551192805E-8
PosZ=-0.146999999880791
Scale=0.800000190734863
a=0.42
MaxValue=5
YAxisRotation=0.0100000146776438
Screen=0
VS0=82
VS1=82
Vfe=170
Va=190
Vne=280

[S10-i]
FileName=S10-i.c3d
PosX=1.4709997177124
PosY=-1.55521551192805E-8
PosZ=-0.146999999880791
Scale=0.800000190734863
a=0.40186
MaxValue=5
YAxisRotation=0.170000016689301
Screen=0
VS0=54
VS1=54
Vfe=92
Va=103
Vne=151

To replace the original vario with the S10

I've tried to put the S10 also on the Ventus 3, but without success. Is this code only valid with the ASW19/20? How do we put the S10 in any glider?

The position will be different (and the speeds for the speed tape), but adapated it should work for any glider.

The positions of the normal S10 aren't the problem, the ones of the S10-i may be, it's where it's supposed to be, but only the knobs appear, and I also have no idea what speeds to put it.

[6266]

I tried a little bit. Of course I have no clue, because I only like the old stuff. But I put your definition into the gau file and saw no difference. After I deleted the V8 instrument, the vario was on a different place. So I guess, you can't have V8 and S10 in one cockpit. What happens when you delete the V8 part?

[GlidingNico(NBE)]

I tried a little bit. Of course I have no clue, because I only like the old stuff. But I put your definition into the gau file and saw no difference. After I deleted the V8 instrument, the vario was on a different place. So I guess, you can't have V8 and S10 in one cockpit. What happens when you delete the V8 part?

You can have both the V8 and the S10 as that's what the devs put on the MiniLak and what also DarkSpeed put on his XA JS3.
After copying a lot of the data from the code that Wiek gave and a doing a subtraction for the X position I've managed to finally make it work.