Prolicosa
- dgtfer
- Posts: 576
- Joined: Mon Nov 19, 2007 9:49 am
- Location: Marseille - france
Prolicosa
For this, I combined the southwest of AA2 and the Sardinia2 scenery by Major98.
The missing parts in Tuscany, Provence, and Corsica are completely new, and the forests have also been redone for Sardinia.
For the Corsican airfields, I used objects by PM3.
The textures have been harmonized to ensure continuity throughout the scenery; in the end, Prolicosa looks quite cohesive.
The scenery is now available on CondorClub:
https://www.condor.club/viewscenery/242/?id=545.
I will now organize a series of TchinTchin flights to explore the different areas under real weather conditions. The goal is to locate the waves in order to launch a large online flight to reproduce the entire record in real-time.
You can also download the flight plans of the records on CC:
https://www.condor.club/showtask/0/?id=23012
https://www.condor.club/showtask/0/?id=23011
- OXO
- Condor Team
- Posts: 6665
- Joined: Mon Feb 13, 2006 1:08 am
- Location: France 42
- Contact:
Re: Prolicosa
Michel, are those few Slovenia 3 airports completed? If so can you mark it in the spreadsheet please.
Chris Wedgwood,
Condor Team
Condor Team
- dgtfer
- Posts: 576
- Joined: Mon Nov 19, 2007 9:49 am
- Location: Marseille - france
Re: Prolicosa
For the next tchin-tchin flight on Prolicosa on Wednesday 12/07 I need volunteers to test an improvement to the Pavulo airfield:
https://mega.nz/file/IhshkB4L#79NbMzuf6 ... JsfTnmKMa4
Installation is straightforward: unzip the ProlicosaPavulo.7z file in Landscapes and accept the Pavulo.obj file replacement. This will also install some textures and a pavuloville.c3d object.
Then make a solo flight or 2 from Pavulo and let me know here if all goes well. But the real test will be on Wednesday online, of course...
All you have to do is download and install this small patch, which doesn't change the version of the scene and doesn't compromise network compatibility:
https://mega.nz/file/IhshkB4L#79NbMzuf6 ... JsfTnmKMa4
Installation is straightforward: unzip the ProlicosaPavulo.7z file in Landscapes and accept the Pavulo.obj file replacement. This will also install some textures and a pavuloville.c3d object.
Then make a solo flight or 2 from Pavulo and let me know here if all goes well. But the real test will be on Wednesday online, of course...
-
- Posts: 339
- Joined: Sun Aug 05, 2007 8:19 pm
- Location: Finland
Re: Prolicosa
Hi,
tested this and I had 15 FPS drop (60 -> 45) when vertical sync is on. Also when that is off at airport area my FPS went down to 45 from 200-220 FPS. All visual setting are maxed except tree density & canopy reflections.
Immediately after leaving airport region all goes back to normal. Tested different weather settings and 2 worst cases are in these pictures.
wbr,
Jarmo
tested this and I had 15 FPS drop (60 -> 45) when vertical sync is on. Also when that is off at airport area my FPS went down to 45 from 200-220 FPS. All visual setting are maxed except tree density & canopy reflections.
Immediately after leaving airport region all goes back to normal. Tested different weather settings and 2 worst cases are in these pictures.
wbr,
Jarmo
- dgtfer
- Posts: 576
- Joined: Mon Nov 19, 2007 9:49 am
- Location: Marseille - france
Re: Prolicosa
Thank You Jarmo, a good test, we'll see online...Jarmo K wrote: ↑Sun Jul 09, 2023 3:09 pmHi,
tested this and I had 15 FPS drop (60 -> 45) when vertical sync is on. Also when that is off at airport area my FPS went down to 45 from 200-220 FPS. All visual setting are maxed except tree density & canopy reflections.
Immediately after leaving airport region all goes back to normal. Tested different weather settings and 2 worst cases are in these pictures.
wbr,
JarmoPavulloWx03.JPGPavulloWx02.JPG
Who is online
Users browsing this forum: No registered users