Hello,
The first serious landscape I have been working on for a few days is pretty small : 5x3 tiles to keep it achievable, but it means that I have to pay attention to the location of the TPs if I want that meaningful triangle tasks can be flown. Several TPs fall into the 5km wide non-flyable zone along the boundary of the scenery.
I can adjust the location of the northwest corner to include as many TPs as possible but the question is : how much margin from the non-flyable zone should I add so that the pilots can fly around the TPs without any major inconvenience? 2km? 5km? More than that?
Thanks in advance for your feedback!
Distance between TPs and non-flyable zone
Re: Distance between TPs and non-flyable zone
I flew a task in Slovenia with less clouds but a very nice one beside a TP, before reaching it I hit the border. Cost me the task, had to land out.
I think 5 km should be a good distance. With 150 km/h you need 2 minutes for 5 km.
EDIT: The turnpoint was VARAZDINSKE TOP
I think 5 km should be a good distance. With 150 km/h you need 2 minutes for 5 km.
EDIT: The turnpoint was VARAZDINSKE TOP
You do not have the required permissions to view the files attached to this post.
Visit https://www.baleit.no
Vintage Series 24, The Journey
26 landscapes with free available textures, newest: AlpsW
Discord https://discord.gg/bAXJaRT6ZC
Vintage Series 24, The Journey
26 landscapes with free available textures, newest: AlpsW
Discord https://discord.gg/bAXJaRT6ZC
Re: Distance between TPs and non-flyable zone
Thanks M.Klett for your input!
How close to the edge is VARAZDINSKE TOP? I can't tell from the screenshot you posted.
How close to the edge is VARAZDINSKE TOP? I can't tell from the screenshot you posted.
Re: Distance between TPs and non-flyable zone
Looks like round about 6 km
You do not have the required permissions to view the files attached to this post.
Visit https://www.baleit.no
Vintage Series 24, The Journey
26 landscapes with free available textures, newest: AlpsW
Discord https://discord.gg/bAXJaRT6ZC
Vintage Series 24, The Journey
26 landscapes with free available textures, newest: AlpsW
Discord https://discord.gg/bAXJaRT6ZC
Re: Distance between TPs and non-flyable zone
6km from the map limit means only 1km away from the non-flyable zone. Looks pretty close indeed
I could get all major TP more than 4.5km away from the non-flyable zone, with only one secondary TP within 4km.
I could get all major TP more than 4.5km away from the non-flyable zone, with only one secondary TP within 4km.
Re: Distance between TPs and non-flyable zone
This will be good enough. The default radius for a tp in Condor is 3000 m.
Visit https://www.baleit.no
Vintage Series 24, The Journey
26 landscapes with free available textures, newest: AlpsW
Discord https://discord.gg/bAXJaRT6ZC
Vintage Series 24, The Journey
26 landscapes with free available textures, newest: AlpsW
Discord https://discord.gg/bAXJaRT6ZC
Re: Distance between TPs and non-flyable zone
Well well well. It seems I was mistaken : the non-flyable zone is not 5km wide, but 1/4 of a tile = 5.760km.
So this means that 4 TPs are only 3.8 km away from the limit. But I could create at least five 150km triangles and one 200km triangles without them.
Everything is settled then...
So this means that 4 TPs are only 3.8 km away from the limit. But I could create at least five 150km triangles and one 200km triangles without them.
Everything is settled then...