FTR to IGC

Moderator: BOD1

Post Reply
BillT
Posts: 6
Joined: Thu Mar 31, 2022 2:33 pm

FTR to IGC

Post by BillT » Thu Mar 31, 2022 2:51 pm

When using Condor2 to analyze FTR and export to IGC file, the turn point "sector" changes. Condor Flight Plan and resulting FTR file show full circles for each turn point. Export to IGC and open the IGC in SeeYou and the turn points have now changed to 90 degree sectors opposite the inbound and outbound courses.

So even in Condor and Condor analyzer, you successfully completed the task by entering the turn point circle, the IGC file does not show an entry into the "sector" and task is not complete.

Any ideas to get the full circle turn point on the igc file?

Thanks
BillT

User avatar
BOD1
Posts: 2142
Joined: Mon Aug 07, 2006 2:45 pm
Location: Brittany, France
Contact:

Re: FTR to IGC

Post by BOD1 » Thu Mar 31, 2022 3:37 pm

We can't define type of turn point in IGC, it accepts only coordinates.
Image
Please use this button to send me a PM, Forum messaging is too limited.
Image

User avatar
Bre901
Posts: 1790
Joined: Tue Nov 22, 2016 8:57 pm
Location: Annecy (France)
Contact:

Re: FTR to IGC

Post by Bre901 » Thu Mar 31, 2022 5:26 pm

Use CoTaCo to convert the .fpl flightplan to .cup task file and import that file into SeeYou
CN: MPT — CondorUTill webpage: https://condorutill.fr/

Post Reply