Modified FTR.
Moderator: BOD1
-
- Posts: 140
- Joined: Wed Feb 05, 2014 2:43 am
Modified FTR.
Hello,
I host a competition on Gliderracing but for all tasks hosted in the server, pilots cannot upload .ftr to Condor Club.
The task has all parameters with normal Condor values.
A red message about "FPL is out of normal parameters. The host needs to edit manually"
How can I avoid it?
Something about DSHelp modifying FPL?
Salute,
Cristiano CON
I host a competition on Gliderracing but for all tasks hosted in the server, pilots cannot upload .ftr to Condor Club.
The task has all parameters with normal Condor values.
A red message about "FPL is out of normal parameters. The host needs to edit manually"
How can I avoid it?
Something about DSHelp modifying FPL?
Salute,
Cristiano CON
Re: Modified FTR.
Are you using a scenery that is known by CC?
-
- Posts: 140
- Joined: Wed Feb 05, 2014 2:43 am
Re: Modified FTR.
Yes,
All the sceneries downloaded from CC and any of them result in the same output.
All values are default Condor V2 option.
All the sceneries downloaded from CC and any of them result in the same output.
All values are default Condor V2 option.
Re: Modified FTR.
Did you try to post your FPL on CC? You may get another message (at least I'll get one in logs).
Without FPL, it's hard to find why you get this.
Thierry
Without FPL, it's hard to find why you get this.
Thierry
-
- Posts: 140
- Joined: Wed Feb 05, 2014 2:43 am
Re: Modified FTR.
Check those FPL, all .FTR flown from these were not accepted at Condor Club.
http://gliderracing.com/pub/GetFlightPl ... =14&t=7970
http://gliderracing.com/pub/GetFlightPl ... =14&t=7965
http://gliderracing.com/pub/GetFlightPl ... =14&t=7954
http://gliderracing.com/pub/GetFlightPl ... =14&t=7952
Can you see any cause of this?
Thanks
Cristiano CON
Re: Modified FTR.
Any FTR by any chance?
Fpl is accepted on CC. I suspect a bug in scenery, where airport altitude is incorrect compared to terrain (at start point). If the difference is more than 30 meters, the FTR is rejected.
Fpl is accepted on CC. I suspect a bug in scenery, where airport altitude is incorrect compared to terrain (at start point). If the difference is more than 30 meters, the FTR is rejected.
- Capricorne
- Posts: 397
- Joined: Wed Jul 08, 2009 6:34 pm
- Location: Strasbourg (France)
- Contact:
Re: Modified FTR.
J'y ai pensé aussi, Thierry , surtout que je n'arrive pas à poster le moindre vol au départ de Bebedouro dans la scène du même nom , que ce soit en un vol en local ou réseau.!!
Mais là dans les 4 FLP il ya quand même 4 scènes différentes dont "Cascade Range"...?
Dans le FLP "MNS_14_2018-22-11.flp " l'altitude du départ est PosZ0=551 alors que dans le fichier .apt l'altitude est de 585m.
Mais pour les 3 autres FLP je n'ai pas regardé ni testé ni essayé de poster un vol sur le CC..
" also thought about it, Thierry, especially since I can't post any flight from Bebedouro in the scene of the same name, whether it's a local(Free flight) or network (Multiplayer) flight...!!
But here in the 4 FLP there are still 4 different scenes including "Cascade Range"...?
In FLP"MNS_14_2018-22-11.flp" the departure altitude is: PPosZ0=551 while in the .apt file the altitude is 585m.
But for the other 3 FLPs I didn't look at, test or try to post a flight to CC......"
Translated with www.DeepL.com/Translator
Last edited by Capricorne on Fri Dec 07, 2018 12:17 pm, edited 1 time in total.
Capricorne - S67
-
- Posts: 140
- Joined: Wed Feb 05, 2014 2:43 am
Re: Modified FTR.
it is the PAN from Gliderracing.
Does not matter what landscape I use, racing or AAT, no one is accepted at Condor Club.
http://gliderracing.com/pub/dayresults.aspx?c=14&t=7965
http://gliderracing.com/pub/dayresults.aspx?c=14&t=7954
http://gliderracing.com/pub/dayresults.aspx?c=14&t=7952
http://gliderracing.com/pub/dayresults.aspx?c=14&t=6952
Does not matter what landscape I use, racing or AAT, no one is accepted at Condor Club.
http://gliderracing.com/pub/dayresults.aspx?c=14&t=7965
http://gliderracing.com/pub/dayresults.aspx?c=14&t=7954
http://gliderracing.com/pub/dayresults.aspx?c=14&t=7952
http://gliderracing.com/pub/dayresults.aspx?c=14&t=6952
- Capricorne
- Posts: 397
- Joined: Wed Jul 08, 2009 6:34 pm
- Location: Strasbourg (France)
- Contact:
Re: Modified FTR.
No matter what FLP I use and no matter if it's a "MULTIPLAYER" on line or not or a "FREE FLY" in Condor, Nothing starting in Bebedouro is accepted by CC..,starting from the nearby Barretos club is okay....?? Have not the time to test all your start position..
Capricorne - S67
-
- Posts: 140
- Joined: Wed Feb 05, 2014 2:43 am
Re: Modified FTR.
It is happening in other scenarios I use:Capricorne wrote: ↑Thu Dec 06, 2018 10:10 amNo matter what FLP I use and no matter if it's a "MULTIPLAYER" on line or not or a "FREE FLY" in Condor, Nothing starting in Bebedouro is accepted by CC..,starting from the nearby Barretos club is okay....?? Have not the time to test all your start position..
Nephi
LEM Bahia V2
Transandino
Looks like it is not about the landscape.
Thanks
- Capricorne
- Posts: 397
- Joined: Wed Jul 08, 2009 6:34 pm
- Location: Strasbourg (France)
- Contact:
Re: Modified FTR.
I just speak from Airport "Bebedouro" since all flight starting for example in "Barretos are Ok for CC.
More strange for Me, is the FLP, you posted for "Cascade Range" ... only the FLP is not OK for CC, if I start my own Flight in "Montague-Yreka-R"
it's OK for CC...?
More strange for Me, is the FLP, you posted for "Cascade Range" ... only the FLP is not OK for CC, if I start my own Flight in "Montague-Yreka-R"
it's OK for CC...?
Capricorne - S67
- Capricorne
- Posts: 397
- Joined: Wed Jul 08, 2009 6:34 pm
- Location: Strasbourg (France)
- Contact:
- Capricorne
- Posts: 397
- Joined: Wed Jul 08, 2009 6:34 pm
- Location: Strasbourg (France)
- Contact:
Re: Modified FTR.
Can you specify what the problem was ? or give a solution ?
Thanks
Capricorne - S67
-
- Posts: 101
- Joined: Fri Mar 21, 2014 12:21 am
Re: Modified FTR.
The problem is in server, read the Thierry email:
"Hello,
Fixed!
I use .TRN file to load scenery data to Condor Club and for unknown reason, the TRN file was not copied on server.
It should be ok now.
Really sorry for that
Thierry"
"Hello,
Fixed!
I use .TRN file to load scenery data to Condor Club and for unknown reason, the TRN file was not copied on server.
It should be ok now.
Really sorry for that
Thierry"