Impossible to show Lift helpers

Moderators: Uros, Tom, OXO

Post Reply
bubugian
Posts: 1
Joined: Fri Dec 02, 2022 4:18 pm

Impossible to show Lift helpers

Post by bubugian » Fri Dec 02, 2022 4:38 pm

Hi all,
I'm having problem with lift helpers.
I understand that, in order to wiew thermals it is sufficient to enable lift helpers pressing 'H' key (or the equivalent remapped key ).

I also try to assign it to a button in my hotas with same result: nothing happens.

What I'm doing wrong ?
Thanks in advance.

Ciao !

User avatar
wickid
Posts: 2429
Joined: Mon Dec 04, 2006 7:32 pm
Location: Venlo, NL
Contact:

Re: Impossible to show Lift helpers

Post by wickid » Fri Dec 02, 2022 4:44 pm

In the notam tab, when you create a flightplan, there is a slider that controls at what distance thermal helpers are visible. If it is set to 0 km, thermal helpers won't be displayed.

See User manual chapter 4 for more details:

https://www.condorsoaring.com/manual_en/
PH-1504, KOE

Post Reply