Glider Polar Data
Re: Glider Polar Data
Following the release of Hangar Update 15, I have updated the polar set, it is available for download : http://condorutill.pagesperso-orange.fr/
The set is complete.
If you are using the handicap value in XCSoar or LK8000, you may want to update all the files because some gliders have got updated handicaps (new DAec index list).
The set is complete.
If you are using the handicap value in XCSoar or LK8000, you may want to update all the files because some gliders have got updated handicaps (new DAec index list).
CN: MPT — CondorUTill webpage: https://condorutill.fr/
Re: Glider Polar Data
Following the release of Hangar Update 16, I have updated the polar set, it is available for download : http://condorutill.pagesperso-orange.fr/
The set is complete.
If you already have installed the polars, you may only extract the Pegase ones as the other ones should be unchanged.
The set is complete.
If you already have installed the polars, you may only extract the Pegase ones as the other ones should be unchanged.
CN: MPT — CondorUTill webpage: https://condorutill.fr/
Re: Glider Polar Data
Following the release of Hangar Update 17, I have updated the polar set, it is available for download : http://condorutill.pagesperso-orange.fr/
The set is complete.
If you already have installed the polars, you may only extract the new ones as the other ones should be unchanged.
The set is complete.
If you already have installed the polars, you may only extract the new ones as the other ones should be unchanged.
CN: MPT — CondorUTill webpage: https://condorutill.fr/
Re: Glider Polar Data
Following the release of Hangar Update 18, I have updated the polar set, it is available for download : http://condorutill.fr/
The set is complete.
If you already have installed the polars, you may only extract the new and modified ones (Ventus3) as the other ones should be unchanged.
The set is complete.
If you already have installed the polars, you may only extract the new and modified ones (Ventus3) as the other ones should be unchanged.
CN: MPT — CondorUTill webpage: https://condorutill.fr/
Re: Glider Polar Data
I don't quite get polar for the EB29
In LK polar water balast is set as 580, but in XC soar polar it is only 174. By the way it is 174 in condor gliders settings tab but if you move the slider it only goes up to 136. What is going on here?
Also:
1) Shouldn't MassDryGross[kg] for duodiscus be 581 not 552?
2) Shouldn't water in ASG19 be 207?
In LK polar water balast is set as 580, but in XC soar polar it is only 174. By the way it is 174 in condor gliders settings tab but if you move the slider it only goes up to 136. What is going on here?
Also:
1) Shouldn't MassDryGross[kg] for duodiscus be 581 not 552?
2) Shouldn't water in ASG19 be 207?
Re: Glider Polar Data
I'll check that, it looks like there is an issue with the Winpilot polar
That has nothing to do with polars !By the way it is 174 in condor gliders settings tab but if you move the slider it only goes up to 136. What is going on here?
It is a Condor feature (same as RL actually): for some gliders the full capacity of the ballast may not be reached if that would lead to having a total mass above MTOW
Next time please create separate threads for unrelated topics
Two-seater I guess ? I'll check that
Also:
1) Shouldn't MassDryGross[kg] for duodiscus be 581 not 552?
Don't know that glider: is it ASG29 or ASW19 ?2) Shouldn't water in ASG19 be 207?
CN: MPT — CondorUTill webpage: https://condorutill.fr/
Re: Glider Polar Data
Sorry for the typo. I meant ASG29
Re: Glider Polar Data
There were actually two different bugs:
For the .plr files, instead of ballast content, I had written the ballast emptying time (typo), which for most gliders has the same value as the ballast content in litres.
The faulty ones were only ASG29 (both), DG808C (both), EB28R
For the DuoDiscus and the Arcus (both .xcp and .plr) I was computing fixed ballast in the same way as single-seaters or two-seaters without ballast (=MTOW-WB-DRY_MASS). It is now 80kg for two-seaters with WB.
The files have been corrected and uploaded to the webpage.
Sorry for the inconvenience
For the .plr files, instead of ballast content, I had written the ballast emptying time (typo), which for most gliders has the same value as the ballast content in litres.
The faulty ones were only ASG29 (both), DG808C (both), EB28R
For the DuoDiscus and the Arcus (both .xcp and .plr) I was computing fixed ballast in the same way as single-seaters or two-seaters without ballast (=MTOW-WB-DRY_MASS). It is now 80kg for two-seaters with WB.
The files have been corrected and uploaded to the webpage.
Sorry for the inconvenience
CN: MPT — CondorUTill webpage: https://condorutill.fr/
Re: Glider Polar Data
Following the release of Hangar Update 19, I have updated the polar set, it is available for download : https://condorutill.fr/
The set is complete.
If you already have installed the polars, you may only extract the new one (PilatusB4) as the other ones should be unchanged.
The set is complete.
If you already have installed the polars, you may only extract the new one (PilatusB4) as the other ones should be unchanged.
CN: MPT — CondorUTill webpage: https://condorutill.fr/
Re: Glider Polar Data
Following the release of Hangar Update 20, I have updated the polar set, it is available for download : https://condorutill.fr/
The set is complete.
If you already have installed the polars, you may only extract the new one (DG1000S) as the other ones should be unchanged.
The set is complete.
If you already have installed the polars, you may only extract the new one (DG1000S) as the other ones should be unchanged.
CN: MPT — CondorUTill webpage: https://condorutill.fr/
Re: Glider Polar Data
Following the release of Hangar Update 22, I have updated the polar set, it is available for download : https://condorutill.fr/
The set is complete.
As there have been some polar adjustments, it's probably easier to extract the whole set than to upgrade individual files
The set is complete.
As there have been some polar adjustments, it's probably easier to extract the whole set than to upgrade individual files
CN: MPT — CondorUTill webpage: https://condorutill.fr/
Re: Glider Polar Data
Following the release of Hangar Update 23, I have updated the polar set, it is available for download : https://condorutill.fr/
The set is complete.
If you already have installed the HU22 polars, you may only extract the new one (LS3a) as the other ones should be unchanged.
The set is complete.
If you already have installed the HU22 polars, you may only extract the new one (LS3a) as the other ones should be unchanged.
CN: MPT — CondorUTill webpage: https://condorutill.fr/
Re: Glider Polar Data
Following the release of Version 2.19 (aka HU24), I have updated the polar set, it is available for download : https://condorutill.fr/
The set is complete.
If you already have installed the HU23 polars, you may only extract the new one (ASW28-15) as the other ones should be unchanged.
The set is complete.
If you already have installed the HU23 polars, you may only extract the new one (ASW28-15) as the other ones should be unchanged.
CN: MPT — CondorUTill webpage: https://condorutill.fr/
Re: Glider Polar Data
Hello guys,
Condor says the VNE of the ASW28-15 is 270 km/h. It's the 18 m one. The 15 m is 285 km/h (source Schleicher).
Have nice flights and thank you to Condor Team.
Condor says the VNE of the ASW28-15 is 270 km/h. It's the 18 m one. The 15 m is 285 km/h (source Schleicher).
Have nice flights and thank you to Condor Team.