Error and blue screen

[BBU25]

This occurs only with GrunauBaby on and off line.
Blue screen with error violation during 30s.

[Uros]

Do you have UDP output enabled? Can you try disabling it?

[BBU25]

I just tried with UDP to 0 or 1,same result.

[dgtfer]

Bernard, try to uncheck the PDA in NOTAM settings;

[BBU25]

OK, it works now.
And for flights with no PDA and GrunauBaby,you think it will be ok to validate TP's crossing,
Merci pour ta reponse Michel.

[dgtfer]

For all tasksetters who would want to launch a GBaby race, it is important that the fpl will be with No PDA.

[dgtfer]

OK, it works now.
And for flights with no PDA and GrunauBaby,you think it will be ok to validate TP's crossing,
Merci pour ta reponse Michel.

We have to test it, on a next GBaby race, but it should be like in V1: NO PDA = screenshot mandatory for each TP.

[BBU25]

So a logic rule would be renewed.
Merci y'a plus qu'à tester,mais ça devrait marcher.

[Love2Fly]

I keep getting blue screen after logging in on a multiplay server.

After logging in for a multiplayer flight, the screen freezes and then the application exits.
Normal free flight is working.

I've sent the logfiles through 'request support'.

Thanks in advance.

[CristianoConrado]

Hello,

Me and a friend are unae to fly the Grunau Baby.
We have blue screen during load screen.

I have a full desktop with I7, 12gb ram and gtx 1080.

All the rest working good, everytging on max at 150+ FPS.

Also noticed too much blur on the landscape not so far distance (everything on max).

Regards,

Cristiano

[Paul_UK]

Strange, My Grunaubaby doesn't cause a blue screen with PDA ticked or unticked in the NOTAM tab. Is there a setting for online racing that amends an ini file or similar which is then causing the issue?

Cristiano to fix your blurry scenery read the two below threads. You need to enable Anistropic filtering via your graphics card control panel. One thread explains for AMD and the other for Nvidia.

viewtopic.php?f=31&t=17735

viewtopic.php?f=29&t=17755

[CristianoConrado]

Thank you Paul, i will try it ASAP.

[janjansen]

Disable the NMEA output in setup/options. Leaving it enabled bluescreens the grunau for me.