Acces violation at address 0070353B

Moderators: Uros, Tom, OXO

Post Reply
LoreCuk
Posts: 21
Joined: Sun May 13, 2018 6:10 pm

Acces violation at address 0070353B

Post by LoreCuk » Wed Aug 17, 2022 3:10 pm

Hi,

I just reinstalled condor and after the first flight I can't start a flight anymore.
After starting the flight immediately a window pops up with this
"Access violation at address 0070353B in module 'Condor.exe'. Read of address 000000000."
I've never experienced this before.
Thx for the help.

User avatar
BOD1
Posts: 2142
Joined: Mon Aug 07, 2006 2:45 pm
Location: Brittany, France
Contact:

Re: Acces violation at address 0070353B

Post by BOD1 » Wed Aug 17, 2022 4:44 pm

You probably deleted a landscape.
Delete Flightplan.fpl in \Documents\Condor2\Pilots\<your pilot name>\ and restart Condor
Image
Please use this button to send me a PM, Forum messaging is too limited.
Image

LoreCuk
Posts: 21
Joined: Sun May 13, 2018 6:10 pm

Re: Acces violation at address 0070353B

Post by LoreCuk » Thu Aug 18, 2022 12:28 am

Hi,

Thanks for the answer, I tried like you said but it doesn't change.
I just installed it on a completely formatted laptop, I didn't delete any landscape,
but I installed AA2 copying it from my landscape hard drive.

LoreCuk
Posts: 21
Joined: Sun May 13, 2018 6:10 pm

Re: Acces violation at address 0070353B

Post by LoreCuk » Thu Aug 18, 2022 1:49 pm

I think I solved the problem.
It was due to the second screen, I needed to assign condor to reassign condor to the screen 1 after disconnecting the second screen.

Thx for the help

Post Reply