Hi folks,
I have have flown over 10h with Condor in VR since I installed it few weeks ago and every time I am still blown away with how close to reality it is.
I have a few questions though regarding the controls set up for the Thrustmaster T1600 joystick. I find the joystick too sensitive when compared to reality, is there a way to adjust the sensitivity of the joystick somewhere in the Condor settings or is that done through an external Logitech software?
Also, the rolling is aiming quite bit to the right when the joystick is centered. Is there a way to adjust that in Condor or again is it something that needs to be set through an external software?
Last question, I have tried to assign the trimmer up and down to buttons on the Thrustmaster but it does not seem to have any effect. I other words I have not found out how to trim up and down.
Thanks in advance
Alain
Thrustmaster T.1600 settings
Re: Thrustmaster T.1600 settings
Never mind I found out that adjusting linearity and ratio in the input settings does the trick for the joystick sensitivity.
Re: Thrustmaster T.1600 settings
Try in Setup - Input to deactivate the option "Stick trim where available", LS4, LS8 and maybe some other planes are working different with this option
Visit https://www.baleit.no
Vintage Series 24, The Journey
26 landscapes with free available textures, newest: AlpsW
Discord https://discord.gg/bAXJaRT6ZC
Vintage Series 24, The Journey
26 landscapes with free available textures, newest: AlpsW
Discord https://discord.gg/bAXJaRT6ZC
Re: Thrustmaster T.1600 settings
Also check that no axis has been assigned to Trimmer, this is located near the top of the control assignments list.
2018 - Silver Badge complete - Forgot I could claim for the 100km diploma flying an out and return
2019 - Get up to speed and aim for a 300km task?! maybe.....
Re: Thrustmaster T.1600 settings
Thank you folks