Hello, I used to have Condor connected to XCSoar on my Android.
Since a couple of weeks this no longer works.
I've also tried a WiFi connection, but when I monitor the COM port with XCSoar on the PC or with PUTTY, it seems that Condor is not sending any data to the COM port. I tried different COM ports, but it doesn't solve the problem.
Is there a way to debug why Condor is not sending data?
No NMEA output
Re: No NMEA output
There should be a file called NMEAlog.txt in the Logs sub-folder of the installation folder.
I thought it required a parameter to be activated, but I found none in the various .ini files so I guess it must written systematically
I thought it required a parameter to be activated, but I found none in the various .ini files so I guess it must written systematically
Last edited by Bre901 on Mon Jul 20, 2020 12:57 pm, edited 1 time in total.
CN: MPT — CondorUTill webpage: https://condorutill.fr/
- EDB
- Posts: 1575
- Joined: Mon Oct 31, 2011 1:17 am
- Location: The Netherlands, Europe Continent, Earth Planet, Milky Way Galaxy, Virgo Super Cluster
Re: No NMEA output
twinpiloot wrote: ↑Sun Jul 19, 2020 11:56 pmIs there a way to debug why Condor is not sending data?
1. Check if a COM port is selected in SETUP
2. Check if PDA is allowed in NOTAM
3. Take a glider with a PDA
4. Fly
5. If nothing happens, check outside Condor
-
- Posts: 2
- Joined: Fri May 08, 2020 6:28 pm
Re: No NMEA output
Thanks. Problem was number 2. I had accidentally disabled the PDA in the NOTAM.