Joystick PXN 2113 doesn´t connect

[jprosa]

Hi
I also have a PXN 2113 joytick.
I opened it and removed the springs, for banking/pitch/yah, now the movment is much more like a real stick.
I have now calibrated it and it is recognized as Generic USB Joystick (Human Interface device).
OS Windows 10
But I cannot see it in Condor.
Can it be because I installed Condor before having the joystick?
Does I need a different driver?
What configuration changes do I need to make in Condor, in way to recognize my joystick?
Thanks in advance.

[Filgueiras]

jprosa,

As far as I can recall, PXN 2113 works only - in condor2 - driven by the manufacturer's software. The windows generic doesn't work .

In condor setup there is a checkbox " FORCE FEEDBACK " that must be unchecked. This was the cause of the problems I had.

[Junichi N]

>As far as I can recall, PXN 2113 works only - in condor2 - driven by the manufacturer's software. The windows generic doesn't work .

I am in this situation described. In my case, I doesn't work even by the manufactures device driver.
A joy stick is recognized in Windows10 device property. It indicates moving input of the stick.
But when I start the Condor2, this simulator software doesn't recognized the stick at all.

Force feed back check box is not selected as recommended.
At this moment I can do nothing to the situation,

Spending a few hours, no joy yet.
Thanks to any help comment from users and the programming team

[OXO]

I bought one to test this in january

It doesnt work with the windows chosen (MS) driver, and windows will not load the manufacturers driver.

I contacted the manufacturer and they are not interested in replying, so you are stuck.

[Junichi N]

Steve, thanks your prompt feed back.
You give me valuable programming team information so that I will avoid another worthless effort.

Manufacture updated PXN2113 driver is found at
http://www.e-pxn.com/view-channel-cid-14.html

As you wrote, the drivers CD-R attached nor web site and did not work with Condor2.
Only once, I could see a moment the manufactures driver was loaded.
The joystick property MS generic was changed to PXN1223. But it did not work.

Hope no one will buy this useless joystick.

[Bre901]

When you google for it, the first place that shows is Wix, an then many dropshipping sites ...

IMHO that should already be a warning to stay clear of it