FAI Virtual Gliding Server, flight 2 is not working.

[cvvs]

In the free flight "Virtual Gliding FAI," for the flight "Condor 3 - Free Flight 2," scene AA3.V0.6, the tow plane does not start. This is possibly an issue with the server configuration.
I then tried to use a motorized glider, and although my engine was deployed, pressing the engine start button didn’t work either. Could the administrator of the FAI virtual gliding server check this issue?

[cvvs]

I feel like the problem I’m experiencing in the FAI free flight is the same issue as the one described in one of the latest posts about the tow planes stopping. The tow plane isn’t working anymore.

[alexlee]

I feel like the problem I’m experiencing in the FAI free flight is the same issue as the one described in one of the latest posts about the tow planes stopping. The tow plane isn’t working anymore.

If the start procedure doesn't work at all they might forgot to start the start procedure. You have to do this manually if it is not checked properly.

[cvvs]

How do I start it manually? When I press the ESC key, I only have the option to quit the flight; I don’t have the option to click on “Start Flight,” like I do on other servers.

[wickid]

How do I start it manually? When I press the ESC key, I only have the option to quit the flight; I don’t have the option to click on “Start Flight,” like I do on other servers.

You never have that option unless you are the host. The host needs to either manually start the launch procedure by typing .start in the chat, or setup DShelper to autostart the tow sequence.

[cvvs]

That’s exactly what I thought. I don’t know who is in charge of the FAI Virtual Gliding section; I thought it was Antoine Havet. I sent a quick private message, but I haven’t received a response yet, and the free flight task still isn’t working when departing from St. Auban.

[cvvs]

It’s working now! I was able to complete a nice 400 km flight yesterday afternoon on the server, departing from St. Auban.