Pacific North West, USA Scenery under development

Everything related to creation of new sceneries for Condor...

Moderators: Uros, OXO

David R
Posts: 769
Joined: Mon Apr 09, 2007 6:57 pm
Location: USA, Washington

Post by David R » Wed May 07, 2008 12:34 am

I got a lot of help from Jack, he tripled my speed. The screen shots are from the south section of the scenery. The north section is more Terragen and less photo real but I think the Terragen makes for better racing than photo real. This scenery has a nice blend of both. Those who want to scenic fly will love the south and those who like to run the ridges will like the north.

I'll try to add some screen shots of the north when I get home.

DMR

David R
Posts: 769
Joined: Mon Apr 09, 2007 6:57 pm
Location: USA, Washington

Post by David R » Wed May 07, 2008 10:55 pm

Ok, PacificNW(1.0) is now done. I have removed the beta version form Andy's ftp site and replaced it with the final version. If you were a beta tester you can down load the final version now. I will upload the final version to the Speedbattle guys tonight and hopefuly it will be available next week to every one.

I was up late last nite finishing the trunpoints so I wasn't able too add any more screen shots. I'll try to get a few more in tonight.

DMR

David R
Posts: 769
Joined: Mon Apr 09, 2007 6:57 pm
Location: USA, Washington

Post by David R » Thu May 08, 2008 5:51 am

Here is a shot from the middle of the scenery, you have a combination of terragen in the hills and photo real for the valley
You do not have the required permissions to view the files attached to this post.

Amouse
Posts: 48
Joined: Fri Mar 28, 2008 5:48 pm
Location: Australia NSW

Well Done :)

Post by Amouse » Thu May 08, 2008 11:20 am

David , Well Done :)

Looks great , will look forward to flying

cloudyifr
Posts: 52
Joined: Sat Feb 02, 2008 3:48 pm
Location: Montana

Post by cloudyifr » Thu May 15, 2008 3:35 pm

It's been a week now and I can't find the download, is it still not posted yet?

Thanks
Curtis
Montana
Image

User avatar
Dave M
Posts: 284
Joined: Fri Mar 17, 2006 8:41 pm
Location: Sunny Cornwall

Post by Dave M » Thu May 15, 2008 4:59 pm

I have looked around for it, and i cannot find it anywhere.
Dave :(

David R
Posts: 769
Joined: Mon Apr 09, 2007 6:57 pm
Location: USA, Washington

Post by David R » Thu May 15, 2008 5:21 pm

I have uploaded it to the SpeedBattle guys but I haven't seen it on there web site yet. I hate to nag them as they are busy people but I'll ask the status. You never know when RL gets in there way.

Sorry about the delay but its not on my end.

User avatar
Stefke
Posts: 458
Joined: Tue May 31, 2005 5:24 pm
Location: Stuttgart, Germany
Contact:

Post by Stefke » Thu May 15, 2008 10:13 pm

Sorry David :oops: for the delay

The installer is ready and the upload is running at the moment.
You do not have the required permissions to view the files attached to this post.

User avatar
LEAN
Posts: 476
Joined: Sat Mar 17, 2007 8:49 am
Location: France - Bretagne nord

Post by LEAN » Fri May 16, 2008 1:36 pm

Hello,
There is a little problem in your package.
I have installed your scenery, but i couldn't open it in Condor.

I had a look on the scenery repertory, and i saw all the files are named : PacificNW(1.0).something (bmp, apt, trn, etc.).
And in Condor, the scenery was named PacificNW.

So, i have renamed all the files without (1.0) and the scenery is correctly named PacificNW[1.0] and it works :D

I don't have time to look at your scenery now, but i say you thank you in advance :D

ps : what have i to do ? let the scenery like it is now in my Condor, or desinstall and waiting for a correct version ?

David R
Posts: 769
Joined: Mon Apr 09, 2007 6:57 pm
Location: USA, Washington

Post by David R » Fri May 16, 2008 5:27 pm

If in condor it is PacificNW then I'm guessing the folder under Landscapes has the wrong name. If you just rename the folder to PacificNW(1.0) then everything should be fine. I'm sure it works fine the way you did it but it might become a server issue in multiflyer.

I'll down load to my laptop tonigh and see what happens their, then I'll know more.


DMR

User avatar
Stefke
Posts: 458
Joined: Tue May 31, 2005 5:24 pm
Location: Stuttgart, Germany
Contact:

Post by Stefke » Fri May 16, 2008 5:38 pm

LEAN wrote:Hello,
There is a little problem in your package.
I have installed your scenery, but i couldn't open it in Condor.

I had a look on the scenery repertory, and i saw all the files are named : PacificNW(1.0).something (bmp, apt, trn, etc.).
And in Condor, the scenery was named PacificNW.

So, i have renamed all the files without (1.0) and the scenery is correctly named PacificNW[1.0] and it works :D

I don't have time to look at your scenery now, but i say you thank you in advance :D

ps : what have i to do ? let the scenery like it is now in my Condor, or desinstall and waiting for a correct version ?
That´s ok what you did, i will change the installer in the same way tonight. Sorry

User avatar
LEAN
Posts: 476
Joined: Sat Mar 17, 2007 8:49 am
Location: France - Bretagne nord

Post by LEAN » Fri May 16, 2008 7:18 pm

No problem, i know you are very busy.
I thought better to report this before many people download the scenery
:wink:

rsm
Posts: 387
Joined: Sun Mar 09, 2008 9:21 am
Location: Cloud base!
Contact:

Post by rsm » Sun May 18, 2008 10:06 am

hi all,

when i fly on the senery al the runway's are white.
what is the problem?

RSM

User avatar
LEAN
Posts: 476
Joined: Sat Mar 17, 2007 8:49 am
Location: France - Bretagne nord

Post by LEAN » Sun May 18, 2008 10:55 am

Hi,

In the first version i've downloaded before, in it, World folder was in the repertory of the scenery, but it was empty and runways was white.

So, i've desinstalled it and downloaded the actual version this morning.

In this version, World folder is missing.

rsm
Posts: 387
Joined: Sun Mar 09, 2008 9:21 am
Location: Cloud base!
Contact:

Post by rsm » Sun May 18, 2008 4:27 pm

hi,

buth i download it this morning.

RSM

Post Reply