Calibration of a map for Dummies on 64 bit systems

Everything related to creation of new sceneries for Condor...

Moderators: Uros, OXO

Post Reply
User avatar
jbreznai
Posts: 563
Joined: Wed Mar 29, 2006 2:21 pm
Location: Hungary / Budapest
Contact:

Calibration of a map for Dummies on 64 bit systems

Post by jbreznai » Sat Jan 13, 2018 7:19 pm

Hi all!

I would like use Lurik's calibration .xls file on my 64bit system, but not managed. :( ( My excell and my system are on 64 bit)
Can you offer me new tool?

Br
Janos

pstrzel
Posts: 328
Joined: Sat Sep 08, 2012 2:02 am
Location: Utah

Re: Calibration of a map for Dummies on 64 bit systems

Post by pstrzel » Sun Jan 14, 2018 4:14 pm

I have not used it in a while, but I always made my sceneries on Windows 64-bit and used Lurik's calibration file with no problem.
Image

User avatar
jbreznai
Posts: 563
Joined: Wed Mar 29, 2006 2:21 pm
Location: Hungary / Budapest
Contact:

Re: Calibration of a map for Dummies on 64 bit systems

Post by jbreznai » Mon Jan 15, 2018 11:52 am

Your Office , excell is also on 64 bit ?

User avatar
Capricorne
Posts: 397
Joined: Wed Jul 08, 2009 6:34 pm
Location: Strasbourg (France)
Contact:

Re: Calibration of a map for Dummies on 64 bit systems

Post by Capricorne » Mon Jan 15, 2018 5:40 pm

Hi Janos,
Can you open the calibration tool. xls ?
Do you use v2.8 ?
If you can NOT click on 1: Select HDR file button > go to "Tools" / "Macro" / "Secutity" and chose security level medium (niveau de sécurité moyen, in french) now close your file, and open it again, you should now have a warning message about Macro! select activate macros...and it should be ok.
If not you can try to do it manually...like here :
http://www.lurik.fr/CondorScenery/04.2b ... OO-en.html
Capricorne - S67

pstrzel
Posts: 328
Joined: Sat Sep 08, 2012 2:02 am
Location: Utah

Re: Calibration of a map for Dummies on 64 bit systems

Post by pstrzel » Mon Jan 15, 2018 5:44 pm

jbreznai wrote:Your Office , excell is also on 64 bit ?
Actually, I run Office 2010 32-bit on Windows 64-bit. I run it in Office 97 "compatibility mode" with .xls file extension.
Sorry for the confusion.
Image

User avatar
jbreznai
Posts: 563
Joined: Wed Mar 29, 2006 2:21 pm
Location: Hungary / Budapest
Contact:

Re: Calibration of a map for Dummies on 64 bit systems

Post by jbreznai » Wed Jan 17, 2018 6:33 am

I used 2.7 version.... :oops: :mrgreen: Learn of life....

2.8 version working perfectly :D

My Hungary_2 would be finish now there are on test phase shortly I going to upload
This scenery will be my 5. Name: Podkarpackie

file_title = Podkarpackie
data_format = int16
map_projection = UTM Zone 34N
ellipsoid = WGS84
left_map_x = 314910
lower_map_y = 5429250
right_map_x = 706500
upper_map_y = 5889960
number_of_rows = 5120
number_of_columns = 4352
elev_m_unit = meters
elev_m_minimum = 0
elev_m_maximum = 2568
elev_m_missing_flag = -9999

User avatar
Capricorne
Posts: 397
Joined: Wed Jul 08, 2009 6:34 pm
Location: Strasbourg (France)
Contact:

Re: Calibration of a map for Dummies on 64 bit systems

Post by Capricorne » Wed Jan 17, 2018 11:52 am

jbreznai wrote:
2.8 version working perfectly :D
Good news... :D
Capricorne - S67

Post Reply