No PDA task start
No PDA task start
Hi All,
I know there is an old thread on this and I have watched the K13 video on pointing your wing to the base of the pole and taking a screenshot, though it never says task started. Does anyone know if this still works in condor2? I am actually trying to so the silver badge tasks on condor club.
Thanks
I know there is an old thread on this and I have watched the K13 video on pointing your wing to the base of the pole and taking a screenshot, though it never says task started. Does anyone know if this still works in condor2? I am actually trying to so the silver badge tasks on condor club.
Thanks
-
- Posts: 23
- Joined: Tue Feb 23, 2021 11:54 pm
Re: No PDA task start
Yea it should say task started and you'll hear a sound. It has to be the left wing I think.
Re: No PDA task start
Left wing and Turnpoint base need to be in frame. And you need to be within the sector
PH-1504, KOE
Re: No PDA task start
You have to be in the Start-Sector
You have your left wingtip pointing towards the base of the (red/white) pole of the startsector ( did you enable turnpionts ?. Usually with the key "J")
while the wingtip is pointing towards the base of the pole you have to press "S" . If you did everything accordingly it with "start your Task"
If not, you have a nice screenshot
also see :
https://www.condor.club/generic/179/
https://condorsoaring.com/forums/viewtopic.php?t=4487
You have your left wingtip pointing towards the base of the (red/white) pole of the startsector ( did you enable turnpionts ?. Usually with the key "J")
while the wingtip is pointing towards the base of the pole you have to press "S" . If you did everything accordingly it with "start your Task"
If not, you have a nice screenshot
also see :
https://www.condor.club/generic/179/
https://condorsoaring.com/forums/viewtopic.php?t=4487
Re: No PDA task start
Thanks for confirming everyone. I have 280 nice screenshots from every angle :-/
Oh well, I will keep trying.
Thanks.
Oh well, I will keep trying.
Thanks.
Re: No PDA task start
If you really:
1) are inside start sector
- check what size sector you have,: default radius is 3000 m and sector angle is 90 degr. = so it's a "piece of pie" -> change that 180 degr.
2) and you have left wing tip and pole base same time visible
Note: if your turn point helper visibility is more than 3000 m, you can see the pole base, but start is not accepted as you are not inside sector (if default is not changed)
3) and pressing S does not give you "task started" text on bottom left of screen
Then only possibility is that start line is not open:
4) check your screen up left corner, if there is race in -clock running, you cannot start before that set time is over.
Condor has default 10 min race-in and 0 min time window = regatta start setting. Change those to your liking: for example race in 1 min and time window 30 min. Then you have lot of time for starting and your task time starts to run only after start.
1) are inside start sector
- check what size sector you have,: default radius is 3000 m and sector angle is 90 degr. = so it's a "piece of pie" -> change that 180 degr.
2) and you have left wing tip and pole base same time visible
Note: if your turn point helper visibility is more than 3000 m, you can see the pole base, but start is not accepted as you are not inside sector (if default is not changed)
3) and pressing S does not give you "task started" text on bottom left of screen
Then only possibility is that start line is not open:
4) check your screen up left corner, if there is race in -clock running, you cannot start before that set time is over.
Condor has default 10 min race-in and 0 min time window = regatta start setting. Change those to your liking: for example race in 1 min and time window 30 min. Then you have lot of time for starting and your task time starts to run only after start.
Re: No PDA task start
One thing I haven't seen mentioned :
The gate must be open: you must have seen the countdown "Race in ..." and heard the beeps
How many monitors do you display Condor on ?
There are some issues with multiple screens, as far as I can remember the start point must be in monitor #1 but I'd gladly stand corrected if I'm wrong
Maybe you could post one of those nice screenshots
The gate must be open: you must have seen the countdown "Race in ..." and heard the beeps
How many monitors do you display Condor on ?
There are some issues with multiple screens, as far as I can remember the start point must be in monitor #1 but I'd gladly stand corrected if I'm wrong
Maybe you could post one of those nice screenshots
CN: MPT — CondorUTill webpage: https://condorutill.fr/
Re: No PDA task start
Only for test purposes
For badges, no change is allowed in the task definition
CN: MPT — CondorUTill webpage: https://condorutill.fr/