Hi,
Is there an easy way to figure out the coordinates required to place instruments on a panel?
I want to modify the layout of the JS1-C, but I can't quite figure out the panel configuration.
Thanks in advance!
Modifying Panel Layout
Re: Modifying Panel Layout
Unless you have the 3D model it is trial and error. Look at the original gauge coordinates to get a rough position and work from there.
PH-1504, KOE
Re: Modifying Panel Layout
Use a text editor to modify the .gau file (I would recommend to make a backup copy before)
Hint : the gauge coordinates are metres
Hint : the gauge coordinates are metres
CN: MPT — CondorUTill webpage: https://condorutill.fr/
-
- Posts: 140
- Joined: Tue Aug 01, 2017 7:29 am
-
- Posts: 55
- Joined: Tue Apr 06, 2021 4:15 pm
Re: Modifying Panel Layout
Actually I do have a question : Can you change the instruments ? For example swap that massive TV screen for the smaller Calculator used in the DG 100 ?
Re: Modifying Panel Layout
No. That is not part of the .gau file. The navigation system is part of the 3D model and can not be changed.
PH-1504, KOE
-
- Posts: 55
- Joined: Tue Apr 06, 2021 4:15 pm