Page 1 of 2

Condor Updater not working?

Posted: Mon Apr 12, 2021 2:33 am
by JBlyth
I tried to use Condor Updater yesterday and today, but it seems to go into an endless loop "Looking for updates" and eventually I get numerous dialogue boxes saying "Incomplete Data from Server".

I have tried reinstalling, but get the same error.

Any suggestions?

Cheers
John in Sunny Carnarvon, Western Australia

Re: Condor Updater not working?

Posted: Mon Apr 12, 2021 9:20 am
by BOD1
Could be from a numerous of possibilities...
What's your IP? https://whatsmyip.com
Did you try to restart your box?
Latest CU version is 2.0.7771, is it the same on your PC?

Re: Condor Updater not working?

Posted: Tue Apr 13, 2021 7:34 am
by Paul_UK
Did you try reinstalling with an executable file that was already on your PC or did you download a new CondorUpdater executable?

If you haven't please download the latest CondorUpdater executable as there was a big update recently to incorporate Goodies into CondorUpdater.

I think I saw the same error you are when my old version asked me to update however I said 'not now'. After that it became stuck in the loop. Just go to CC site and download the latest CondorUpdater to install. Maybe try uninstalling the old version before installing the new version too.

Re: Condor Updater not working?

Posted: Thu Apr 15, 2021 12:45 pm
by JBlyth
Thanks Paul,

Yep - I uninstalled and did a brand new install from a new downloaded executable. It did pick up the old settings. Perhaps my next step will be to uninstall again, find the settings file, delete that and try another new install.

It's still happening, and this is what I am seeing before it goes nuts...
Snip Condor Updater.jpg
Cheers
John in Sunny Carnarvon - Western Australia

Re: Condor Updater not working?

Posted: Thu Apr 15, 2021 12:52 pm
by BOD1
Obviously the wrong version is installed, or you installed the new one elsewhere and still run the old version.
Try uninstall Condor Updater and look if this old version is still somewhere. Maybe antiramsonware is preventing installation of the new version?
Ensure the Installer you run is really the one you just downloaded.
And normally, CU is updated automatically so you should always have the latest version. So something is interferring.

Re: Condor Updater not working?

Posted: Thu Apr 15, 2021 3:00 pm
by Paul_UK
https://www.condor.club/sceneries/197/

At the top of the above page is the link to download the latest Condor Updaterinstaller. As BOD says it sounds like you're reinstalling an old version or still running an old version.

Re: Condor Updater not working?

Posted: Fri Apr 16, 2021 11:17 pm
by JBlyth
Thanks for the replies.

I have done the following:-
  • Removed the Condor Updater program
  • Deleted the \AppData\Roaming\Condor Updater folder
  • Rebooted
  • Checked the registry for entries not removed after the uninstall
  • Run the fresh install from the installer program
  • I still get the same error messages and continual looping
  • I have attached the error log below.
  • It is interesting that the defaults I had previously set have been reinstated. Where on earth is the software picking that up from?
Many thanks
John in Sunny Carnarvon - Western Australia

2021-04-17T04:58:00.303Z: Starting ID #13876
2021-04-17T04:58:00.307Z: New instance
2021-04-17T04:58:00.311Z: Reading configuration
2021-04-17T04:58:00.314Z: Condor2 v2.1.6 and Hangar 19 are installed in C:\Condor2
2021-04-17T04:58:00.316Z: LandscapesPath: C:\Condor2\Landscapes
2021-04-17T04:58:00.318Z: JunctionPath: D:\CondorLandscapes
2021-04-17T04:58:00.319Z: DownloadPath: D:\CondorLandscapes\DownloadedFiles
2021-04-17T04:58:00.320Z: DeletePackagesAfterInstall: False
2021-04-17T04:58:00.325Z: ServerInstall: False
2021-04-17T04:58:00.326Z: SetCompressedFolders: False
2021-04-17T04:58:00.328Z: useJunction: True
2021-04-17T04:58:00.329Z: suspendOnFinished: False
2021-04-17T04:58:00.330Z: showNotifications: True
2021-04-17T04:58:00.332Z: lastUpdateCheck: 2021-04-16
2021-04-17T04:58:00.336Z: CondorUpdaterVersion: 2.0.7771 (build 56597)
2021-04-17T04:58:00.339Z: CFAEnabled: False
2021-04-17T04:58:00.348Z: useSingleThreadExtract: False
2021-04-17T04:58:00.349Z: Init completed.
2021-04-17T04:58:03.749Z: Activate form
2021-04-17T04:58:03.751Z: Click check for updates
2021-04-17T04:58:03.800Z: Click check for updates
2021-04-17T04:58:03.841Z: Click check for updates
2021-04-17T04:58:04.217Z: Click check for updates
2021-04-17T04:58:05.355Z: Click check for updates
2021-04-17T04:58:06.013Z: Click check for updates
2021-04-17T04:58:09.773Z: Click check for updates
2021-04-17T04:58:15.514Z: Click check for updates
2021-04-17T04:58:17.003Z: Click check for updates
2021-04-17T04:58:19.861Z: Click check for updates
2021-04-17T04:58:20.602Z: Click check for updates
2021-04-17T04:58:21.381Z: Click check for updates
2021-04-17T04:58:25.760Z: Click check for updates
2021-04-17T04:58:30.096Z: Click check for updates
2021-04-17T04:58:34.585Z: Click check for updates
2021-04-17T04:58:38.861Z: Click check for updates
2021-04-17T04:58:40.237Z: Click check for updates
2021-04-17T04:58:42.808Z: Cannot connect to server, Doublons non autorisés
2021-04-17T04:58:43.213Z: Click check for updates
2021-04-17T04:58:43.388Z: Click check for updates
2021-04-17T04:58:43.434Z: Click check for updates
2021-04-17T04:58:44.581Z: Click check for updates
2021-04-17T04:58:47.397Z: Cannot connect to server, Doublons non autorisés
2021-04-17T04:58:47.625Z: Click check for updates

Re: Condor Updater not working?

Posted: Fri Apr 16, 2021 11:49 pm
by BOD1
That's very weird, it looks like a ghost is clicking on Refresh button every second or so...
I've released a new version (2.0.7776) with more logs to trace who is calling the "Click check for updates" function.
Could you please install it and post the logs here? No need to uninstall everything. Please post also content of CondorUpdater.log.1, it contains logs from previous run and could show if several instances are running at the same time.

Re: Condor Updater not working?

Posted: Sat Apr 17, 2021 12:05 am
by JBlyth
Trying it now...

Re: Condor Updater not working?

Posted: Sat Apr 17, 2021 12:20 am
by JBlyth
About 30 minutes ago I did also delete the registry key CondorUpdater which had not be removed by removing the program previously. That was where it was picking up the old settings from.

Now I get this message box after an earlier one about not having a key....
Updater1.png
And then it - suddenly starting working properly and I was able to download a new key. Perhaps on the second running of the program.

Very strange.

Here is the log file - sorry, it seems that only images are accepted as attachements.
2021-04-17T06:11:26.711Z: Starting ID #15152
2021-04-17T06:11:26.714Z: New instance
2021-04-17T06:11:26.716Z: Reading configuration
2021-04-17T06:11:26.719Z: Condor2 v2.1.6 and Hangar 19 are installed in C:\Condor2
2021-04-17T06:11:26.722Z: LandscapesPath: C:\Condor2\Landscapes
2021-04-17T06:11:26.724Z: JunctionPath: C:\Condor2\Landscapes
2021-04-17T06:11:26.727Z: DownloadPath: C:\Users\jblyt\Downloads
2021-04-17T06:11:26.736Z: DeletePackagesAfterInstall: False
2021-04-17T06:11:26.742Z: ServerInstall: False
2021-04-17T06:11:26.745Z: SetCompressedFolders: False
2021-04-17T06:11:26.749Z: useJunction: False
2021-04-17T06:11:26.763Z: suspendOnFinished: False
2021-04-17T06:11:26.767Z: showNotifications: True
2021-04-17T06:11:26.771Z: lastUpdateCheck: 2020-01-01
2021-04-17T06:11:26.773Z: CondorUpdaterVersion: 2.0.7776 (build 19875)
2021-04-17T06:11:26.776Z: CFAEnabled: False
2021-04-17T06:11:26.779Z: useSingleThreadExtract: False
2021-04-17T06:11:26.783Z: Init completed.
2021-04-17T06:11:29.262Z: Key invalid
2021-04-17T06:11:37.415Z: Activate form
2021-04-17T06:11:37.416Z: Activation complete
2021-04-17T06:11:37.418Z: Click check for updates
2021-04-17T06:11:38.029Z: Unknown parameter:
2021-04-17T06:11:38.058Z: Unknown parameter:
2021-04-17T06:11:38.210Z: Unknown parameter:
2021-04-17T06:11:38.242Z: Unknown parameter:
2021-04-17T06:11:38.287Z: Unknown parameter:
2021-04-17T06:11:38.720Z: Unknown parameter:
2021-04-17T06:11:38.829Z: Unknown parameter:
2021-04-17T06:11:38.876Z: Unknown parameter:
2021-04-17T06:11:38.927Z: Unknown parameter:
2021-04-17T06:11:39.000Z: Unknown parameter:
2021-04-17T06:11:39.040Z: Unknown parameter:
2021-04-17T06:11:39.505Z: Unknown parameter:
2021-04-17T06:11:41.036Z: Unknown parameter:
2021-04-17T06:11:42.446Z: Unknown parameter:
2021-04-17T06:11:43.936Z: Unknown parameter:
2021-04-17T06:11:45.349Z: Unknown parameter:
2021-04-17T06:11:46.826Z: Unknown parameter:
2021-04-17T06:11:48.230Z: Unknown parameter:
2021-04-17T06:11:48.358Z: Unknown parameter:
2021-04-17T06:11:49.965Z: Unknown parameter:
2021-04-17T06:11:50.066Z: Unknown parameter:
2021-04-17T06:11:51.197Z: Unknown parameter:
2021-04-17T06:11:52.565Z: Unknown parameter:
2021-04-17T06:11:54.376Z: Unknown parameter:
2021-04-17T06:11:55.557Z: Unknown parameter:
2021-04-17T06:11:57.009Z: Unknown parameter:
2021-04-17T06:11:58.090Z: Unknown parameter:
2021-04-17T06:11:58.332Z: Unknown parameter:
2021-04-17T06:11:59.840Z: Unknown parameter:
2021-04-17T06:12:01.365Z: Unknown parameter:
2021-04-17T06:12:02.079Z: Unknown parameter:
2021-04-17T06:12:02.692Z: Unknown parameter:
2021-04-17T06:12:04.229Z: Unknown parameter:
2021-04-17T06:12:05.639Z: Unknown parameter:
2021-04-17T06:12:06.965Z: Unknown parameter:
2021-04-17T06:12:07.041Z: Unknown parameter:
2021-04-17T06:12:08.609Z: Unknown parameter:
2021-04-17T06:12:08.652Z: Unknown parameter:
2021-04-17T06:12:10.134Z: Unknown parameter:
2021-04-17T06:12:10.819Z: Unknown parameter:
2021-04-17T06:12:11.247Z: Unknown parameter:
2021-04-17T06:12:11.589Z: Unknown parameter:
2021-04-17T06:12:14.440Z: Unknown parameter:
2021-04-17T06:12:15.858Z: Unknown parameter:
2021-04-17T06:12:17.318Z: Unknown parameter:
2021-04-17T06:12:18.560Z: Unknown parameter:
2021-04-17T06:12:18.694Z: Unknown parameter:
2021-04-17T06:12:20.190Z: Unknown parameter:
2021-04-17T06:12:21.694Z: Restart as elevated
2021-04-17T06:12:29.344Z: Restart elevated done

Re: Condor Updater not working?

Posted: Sat Apr 17, 2021 12:24 am
by JBlyth
And here is the log from the latest running of the program. You can see I have my updated settings now...

2021-04-17T06:22:07.639Z: Starting ID #15660
2021-04-17T06:22:07.641Z: New instance
2021-04-17T06:22:07.643Z: Reading configuration
2021-04-17T06:22:07.648Z: Condor2 v2.1.6 and Hangar 19 are installed in C:\Condor2
2021-04-17T06:22:07.650Z: LandscapesPath: C:\Condor2\Landscapes
2021-04-17T06:22:07.652Z: JunctionPath: D:\CondorLandscapes
2021-04-17T06:22:07.654Z: DownloadPath: D:\CondorLandscapes
2021-04-17T06:22:07.656Z: DeletePackagesAfterInstall: True
2021-04-17T06:22:07.658Z: ServerInstall: False
2021-04-17T06:22:07.659Z: SetCompressedFolders: False
2021-04-17T06:22:07.661Z: useJunction: True
2021-04-17T06:22:07.663Z: suspendOnFinished: False
2021-04-17T06:22:07.665Z: showNotifications: True
2021-04-17T06:22:07.666Z: lastUpdateCheck: 2020-01-01
2021-04-17T06:22:07.668Z: CondorUpdaterVersion: 2.0.7776 (build 19875)
2021-04-17T06:22:07.670Z: CFAEnabled: False
2021-04-17T06:22:07.672Z: useSingleThreadExtract: False
2021-04-17T06:22:07.674Z: Init completed.
2021-04-17T06:22:10.349Z: Activate form
2021-04-17T06:22:10.356Z: Activation complete
2021-04-17T06:22:10.361Z: Click check for updates
2021-04-17T06:22:10.573Z: Unknown parameter:
2021-04-17T06:22:10.655Z: Unknown parameter:
2021-04-17T06:22:10.690Z: Unknown parameter:
2021-04-17T06:22:10.720Z: Unknown parameter:
2021-04-17T06:22:10.831Z: Unknown parameter:
2021-04-17T06:22:10.887Z: Unknown parameter:
2021-04-17T06:22:11.218Z: Unknown parameter:
2021-04-17T06:22:24.304Z: Exiting application ID #15660

Re: Condor Updater not working?

Posted: Sat Apr 17, 2021 12:46 am
by BOD1
Something is launching CondorUpdater repeatedly. I can't figure out what... New version again (build 2207) online, please try it! And don't delete registry or other, that could rise other problems I'm not tracking here.
After installation and before run Condor Updater, please delete logs file then run CU once, wait ~10 seconds then close it.
How many log files do you have? could you post them here? Thank you, we'll catch this damn bug!

Re: Condor Updater not working?

Posted: Sat Apr 17, 2021 4:47 am
by JBlyth
Here you go, BOD1,

Sorry it took a while to do. I got up at 4am and decided to go back to bed at 6am for more beauty sleep ;-)....

I did as you requested and ran the app for about 10 seconds and generated this log. I then ran it again for much longer and didn't have any issues.

Well done with such a speedy fix!

Cheers
John in Sunny Carnarvon - Western Australia.

2021-04-17T10:41:02.277Z: DownloadPath: D:\CondorLandscapes
2021-04-17T10:41:02.278Z: DeletePackagesAfterInstall: True
2021-04-17T10:41:02.279Z: ServerInstall: False
2021-04-17T10:41:02.280Z: SetCompressedFolders: False
2021-04-17T10:41:02.282Z: useJunction: True
2021-04-17T10:41:02.283Z: suspendOnFinished: False
2021-04-17T10:41:02.285Z: showNotifications: True
2021-04-17T10:41:02.286Z: lastUpdateCheck: 2021-04-17
2021-04-17T10:41:02.287Z: CondorUpdaterVersion: 2.0.7776 (build 2207)
2021-04-17T10:41:02.288Z: CFAEnabled: False
2021-04-17T10:41:02.290Z: useSingleThreadExtract: False
2021-04-17T10:41:02.293Z: Init completed.
2021-04-17T10:41:04.668Z: Activate form
2021-04-17T10:41:04.669Z: Activation complete
2021-04-17T10:41:04.670Z: Click check for updates
2021-04-17T10:41:04.769Z: Atom received: **(0)
2021-04-17T10:41:04.774Z: Atom received: **(0)
2021-04-17T10:41:04.778Z: Atom received: **(0)
2021-04-17T10:41:04.861Z: Atom received: **(0)
2021-04-17T10:41:04.924Z: Atom received: **(0)
2021-04-17T10:41:04.993Z: Atom received: **(0)
2021-04-17T10:41:05.043Z: Atom received: **(0)
2021-04-17T10:41:17.074Z: Exiting application ID #18344

Re: Condor Updater not working?

Posted: Sat Sep 09, 2023 4:18 pm
by joncoughlin
I am getting this same error message. My log looks different - maybe more of a raw internet issue?
Any help appreciated!

Code: Select all

2023-09-09T09:17:39.801Z: Starting ID #9120
2023-09-09T09:17:39.805Z: New instance
2023-09-09T09:17:39.810Z: Reading configuration
2023-09-09T09:17:39.814Z: Condor2 v218 and Hangar 23 are installed in C:\Condor2
2023-09-09T09:17:39.819Z: LandscapesPath: C:\Condor2\Landscapes
2023-09-09T09:17:39.823Z: XCSoarPath: C:\Users\User\Documents\
2023-09-09T09:17:39.827Z: LK8000Path: C:\Users\User\Documents\
2023-09-09T09:17:39.832Z: JunctionPath: C:\Condor2\Landscapes
2023-09-09T09:17:39.836Z: DownloadPath: C:\Users\User\Downloads
2023-09-09T09:17:39.840Z: DeletePackagesAfterInstall: True
2023-09-09T09:17:39.845Z: ServerInstall: False
2023-09-09T09:17:39.849Z: SetCompressedFolders: False
2023-09-09T09:17:39.854Z: useJunction: False
2023-09-09T09:17:39.858Z: suspendOnFinished: False
2023-09-09T09:17:39.863Z: showNotifications: True
2023-09-09T09:17:39.867Z: lastUpdateCheck: 2023-09-08
2023-09-09T09:17:39.872Z: CondorUpdaterVersion: 2.1.8385 (build 26266)
2023-09-09T09:17:39.876Z: CFAEnabled: False
2023-09-09T09:17:39.881Z: useSingleThreadExtract: False
2023-09-09T09:17:39.885Z: Init completed.
2023-09-09T09:17:40.875Z: Activate form
2023-09-09T09:17:40.881Z: Activation complete
2023-09-09T09:17:40.887Z: Click check for updates
2023-09-09T09:17:42.171Z: Cannot connect to server, Violation d'acc�s � l'adresse 0078D946 dans le module 'CondorUpdater.exe'. Lecture de l'adresse 00000004
2023-09-09T09:17:45.406Z: Exiting application ID #9120

Re: Condor Updater not working?

Posted: Sat Sep 09, 2023 4:22 pm
by BOD1
What's the error? There is nothing in there log.