Laptop screen and external monitor give identical image

[vanliessum]

I use a Macbook Pro with Bootcamp to run Windows 10.
Condor runs well on the laptop but I have an identical image on the second monitor and I need it only on the external monitor (1). After joining flight my cursor has disappears(2). Furthermore I cannot regulate the volume in flight (3).
So.. three problems! Any ideas?

[JShieck]

Problem 1:
go to Windows Settings > System > Display and there is a option were you can select both screens mirrored, both screens extended, only laptop screen or only exterior screen.

Problem 2:
This is completly normal. You can't use the curser while flying. Press Escape for starting flight. (Cursor will appear automatically)
Assign a key for everything you need to control.

Problem 3:
Press the windows-key . The taskbar will appear. So you can change the main volume using the mini icons in the right area.

[vanliessum]

Thank you for your suggestions.
1. The settings of the screen of the macbook (laptop) and external monitor are ok and work fine using different programs, that I can sweep from one screen to the other. But no program shows itself in a similar way on both screens at the same time. Generally I use the external monitor that is larger for the main program. If necessary, I can still work also on the Macbook screen.
2. That's clear
3. I have a Mac keyboard, so no Windows key.

[DanD]

Don't f11 (decrease volume) and f12 (increase volume) work on your MacBook keyboard?

[vanliessum]

@JShiek:
1. Found out that it can be setup in Condor. Problem solved.
3. Mac Command key works the same as the Windows key, so this problem solved as well. Thnx.

@DanD:
Might work, I will try it tomorrow. Thnx for suggesting it.