I want to connect my external tablet with XCSOAR to condor and when I go to SETUP / OPTIONS... in the "NMEA port" box the word "enable" appears pale and I can not select any com port.
Thank for your help
Luca
nmea port
Re: nmea port
Appendix 5 of the user manual https://www.condorsoaring.com/manual_en/ describes setting up Condor to an external pda, and XC Soar is specifically covered (using virtual serial ports - links provided). They also have a link you can put in XC Soar with polars of the modeled gliders.
Dan
Dan
Re: nmea port
Many thanks, Dan!
I followed the instructions but when I reach N5:
5. Start Condor, go to Setup > Options > NMEA Output and check number of the last existing COM port (e.g. COM4). Exit Condor.
.. I can not check the Enable box (see attached file) and so I can not open the COM port menu
Any idea ?
Thanks in advance
Luca
I followed the instructions but when I reach N5:
5. Start Condor, go to Setup > Options > NMEA Output and check number of the last existing COM port (e.g. COM4). Exit Condor.
.. I can not check the Enable box (see attached file) and so I can not open the COM port menu
Any idea ?
Thanks in advance
Luca
You do not have the required permissions to view the files attached to this post.
Re: nmea port
To enable the checkbox, start and configure XCsoar and/or VSPE!
*****- Xavier - (XDL - VR FAN) *****