Moderators: Uros, Tom, OXO
-
OXO
- Condor Team
- Posts: 6367
- Joined: Mon Feb 13, 2006 1:08 am
- Location: France 42
-
Contact:
Post
by OXO » Sat May 09, 2020 8:34 am
congo wrote: ↑Sat May 09, 2020 8:10 am
Thanks Chris,
I just checked this. As far as I can tell, the file is globally the same for each glider.
However, after your comment above, I checked the ASW-20b's file, and it was the same file size,
but a different date stamp compared to other gliders, I am perplexed about this, but have seen
similar things happen before, where I tried to theorise that it came off another devs desktop and
somehow had the date stamp changed.
The reason I asked is that my cockpit mod is dependent on this file being an older version to eliminate
the new flap rings, and I always have to check this after an update.
Thanks again
There is a default texture in gauges folder, but each plane has a specific texture for the asi in the (e.g. ASW20\gauges) folder. This replaces the default texture.
This is because each plane has different speed ranges for the coloured arc, vne etc. The texture file is always the same size.
Chris Wedgwood,
Condor Team
-
Paul_UK
- Posts: 828
- Joined: Sat Aug 29, 2009 1:05 pm
- Location: Southampton, UK
Post
by Paul_UK » Sat May 09, 2020 8:37 am
How do you turn off the writing for other pilots? I found the option in settings under network for plane icons however there is only a tickbox to turn off/on plane type.
2018 - Silver Badge complete - Forgot I could claim for the 100km diploma flying an out and return
2019 - Get up to speed and aim for a 300km task?! maybe.....
-
G-ROB
- Posts: 51
- Joined: Fri Jan 08, 2010 8:26 pm
- Location: South Africa
Post
by G-ROB » Sat May 09, 2020 8:42 am
Paul_UK wrote: ↑Sat May 09, 2020 8:37 am
How do you turn off the writing for other pilots? I found the option in settings under network for plane icons however there is only a tickbox to turn off/on plane type.
The
* key on the num pad
ZS-GLP
-
Xavier
- Posts: 622
- Joined: Fri Jun 20, 2008 2:22 pm
- Location: France
Post
by Xavier » Sat May 09, 2020 9:52 am
@ OXO
There is a little glitch in the manual about "spectacle"
After the last illustration "Server Options":
Ranking ec.. till end are put a second time
I saw this glitch while translating to French.
*****- Xavier - (XDL - VR FAN) *****
-
OXO
- Condor Team
- Posts: 6367
- Joined: Mon Feb 13, 2006 1:08 am
- Location: France 42
-
Contact:
Post
by OXO » Sat May 09, 2020 9:56 am
Xavier wrote: ↑Sat May 09, 2020 9:52 am
@ OXO
There is a little glitch in the manual about "spectacle"
After the last illustration "Server Options":
Ranking ec.. till end are put a second time
I saw this glitch while translating to French.
Marc is updating the french manual now. Probably it will be on the site next week.
Chris Wedgwood,
Condor Team
-
wilhelmson
- Posts: 1
- Joined: Sat May 09, 2020 10:21 am
Post
by wilhelmson » Sat May 09, 2020 10:32 am
I have a problem after installing patch and hangar update
Happened yesterday when I tried to join a server for a competition, a message of wrong version appared.
So I installed the patch 2.1.2 and the hangar update but when I tried again to enter this message came out
"access violation at address 00490884 in module 'Condor.exe'
Read of address 024FFFF8"
I reinstalled the patch 2.1.2 and hangar update, same problem.
I uninstalled the game, deleted the Condor folder in documents and reistalled, created a new pilot and, with the version 2.1.0 I can fly, but as soon as I install the patch 2.1.2 with hangar update the message show up again and is impossible to fly even in freeflight
You do not have the required permissions to view the files attached to this post.
-
wickid
- Posts: 2442
- Joined: Mon Dec 04, 2006 7:32 pm
- Location: Venlo, NL
-
Contact:
Post
by wickid » Sat May 09, 2020 10:44 am
wilhelmson wrote: ↑Sat May 09, 2020 10:32 am
I have a problem after installing patch and hangar update
Happened yesterday when I tried to join a server for a competition, a message of wrong version appared.
So I installed the patch 2.1.2 and the hangar update but when I tried again to enter this message came out
"access violation at address 00490884 in module 'Condor.exe'
Read of address 024FFFF8"
I reinstalled the patch 2.1.2 and hangar update, same problem.
I uninstalled the game, deleted the Condor folder in documents and reistalled, created a new pilot and, with the version 2.1.0 I can fly, but as soon as I install the patch 2.1.2 with hangar update the message show up again and is impossible to fly even in freeflight
After installing 2.1.2, delete or rename mydocuments/condor. Then create a new pilot.
PH-1504, KOE
-
egidio babbi
- Posts: 1
- Joined: Mon Nov 02, 2009 5:39 pm
Post
by egidio babbi » Sat May 09, 2020 10:56 am
Yesterday was a mess! My group played in different servers, multi or single player, but to many problems.
Why sort out a release not working!!!!
And the wind was still not working paired with the hills....
Not a good box for such money.
I mean far away from a simulator!
Egi
-
OXO
- Condor Team
- Posts: 6367
- Joined: Mon Feb 13, 2006 1:08 am
- Location: France 42
-
Contact:
Post
by OXO » Sat May 09, 2020 11:03 am
egidio babbi wrote: ↑Sat May 09, 2020 10:56 am
Yesterday was a mess! My group played in different servers, multi or single player, but to many problems.
Why sort out a release not working!!!!
And the wind was still not working paired with the hills....
Not a good box for such money.
I mean far away from a simulator!
Egi
Which server, which flightplan, how many player? Any of this information could help.
Why are you not interested in helping fix this issue?
Chris Wedgwood,
Condor Team
-
Thunderjet
- Posts: 64
- Joined: Sun Sep 17, 2006 9:02 pm
- Location: Milano - Italy
Post
by Thunderjet » Sat May 09, 2020 11:15 am
After update i have experienced many many freeze durig flight on AA2 in Italian virtual championships.
BIG BIG BIG BIG Problem especcialy when thermals are full of glider or whn you fly close to the ridge.
PLEASE PLEASE PLEASE fix this bug or release a roll back to previous versoin !!!
Is better stay on ground and dream to fly than stay on fly and dream to stay on ground
-
phil_delaine
- Posts: 105
- Joined: Mon Feb 11, 2013 9:40 am
- Location: Montpellier - France
-
Contact:
Post
by phil_delaine » Sat May 09, 2020 11:34 am
Hi:
So now we have :
max nbr of pilots = 64
max nbr of spectators = 64
We can have 64 spectators rushing to view a super competition with 0 pilots !??
I would suggest a better scheme :
max nbr of spectators = 32 with default value=0
or even better :
allow joining as spectators only after join time has elapsed and check nbr of pilots+nbr of spectators <=64
What do you think about?
-
OXO
- Condor Team
- Posts: 6367
- Joined: Mon Feb 13, 2006 1:08 am
- Location: France 42
-
Contact:
Post
by OXO » Sat May 09, 2020 12:22 pm
phil_delaine wrote: ↑Sat May 09, 2020 11:34 am
What do you think about?
I think we can trust the server admins to set sensible values.
Chris Wedgwood,
Condor Team
-
phil_delaine
- Posts: 105
- Joined: Mon Feb 11, 2013 9:40 am
- Location: Montpellier - France
-
Contact:
Post
by phil_delaine » Sat May 09, 2020 12:28 pm
Hi Chris,
Looking at the too many complaints above, I think I would have liked to trust the sCondor developpers to set sensible values.
Thx
-
Pit_R
- Posts: 1348
- Joined: Mon Feb 27, 2006 7:16 pm
Post
by Pit_R » Sat May 09, 2020 12:33 pm
Maybe I'll ask here again.
How spectate feature can be used in any competitions without time delay?!
No matter where you go... There you are...
:::
: Please use this envelope
to send me a PM.