Moderators: Tom, Uros, OXO
-
Big Mike
- Posts: 173
- Joined: Fri Oct 13, 2006 11:00 am
Post
by Big Mike » Thu Nov 14, 2024 11:27 am
OK guys just a simple turn of the top right knob does it....
Its been a while on the LX, even though they are in the twoseaters at Denbigh

-
JLN
- Posts: 170
- Joined: Wed Jun 17, 2020 5:46 pm
Post
by JLN » Fri Jan 17, 2025 4:24 pm
Hello,
I tried to use lx9070, on the eglide comp of yesterday and I have this screen :
I have always this strange waypoint à 1563 km.
So is it possible to restore the lxsim ? or how to reset it ?
And how to change the profile as I have not found how to do that.
I know that I can remove the sd card but I dont know how to put a new one.
Thanks for any help
-
Attachments
-

-
RVB
- Posts: 19
- Joined: Wed Feb 21, 2018 1:45 pm
Post
by RVB » Fri Jan 17, 2025 8:24 pm
You are in Airport mode, two pages to the right gives Task mode.
Default two times keypad NUM 9
To change profile put it on the SD card in the folder in LXSIM in the condor3 folder. Navigate to the settings page (also with NUM 9), there you can select profiles
-
havet865
- Posts: 146
- Joined: Mon Feb 12, 2018 11:35 am
Post
by havet865 » Sat Jan 18, 2025 11:59 am
@JLN change your pages using '9' on keyboard, or the rotating knob top right on LXsim.
Then you will have a full page of parameters. Then go to Profiles and click on 'load' and then 'active' for the profile you want.
Don't forget to use your LX in Task Mode.. third page of the LX.
Antoine
-
JLN
- Posts: 170
- Joined: Wed Jun 17, 2020 5:46 pm
Post
by JLN » Sun Jan 19, 2025 9:21 am
Thanks for the info. I succeeded to change the profile, but now my LX shows a black screen when I start the flight.
How to have it to show the task ?
Thanks for any help.
-
wickid
- Posts: 3253
- Joined: Mon Dec 04, 2006 7:32 pm
- Location: Venlo, NL
-
Contact:
Post
by wickid » Sun Jan 19, 2025 9:23 am
Have you tried reading the manual? You need to be in TSK mode (top left corner of the screen).
PH-1504, KOE
Condor beta team/Plane developer
-
JLN
- Posts: 170
- Joined: Wed Jun 17, 2020 5:46 pm
Post
by JLN » Sun Jan 19, 2025 2:09 pm
Yes I tried. The profile loaded has only task mode. So I thought it loaded the task automatically.
-
Attachments
-

- Sans titre-1.jpg (124.95 KiB) Viewed 753 times
-
wickid
- Posts: 3253
- Joined: Mon Dec 04, 2006 7:32 pm
- Location: Venlo, NL
-
Contact:
Post
by wickid » Sun Jan 19, 2025 2:21 pm
Yes it does. It looks like you have a profile with some stuff switched off like the background map. I would advise you to use a different profile if you don't know how to switch it on.
PH-1504, KOE
Condor beta team/Plane developer
-
velaskez
- Posts: 40
- Joined: Sun Nov 18, 2007 7:38 pm
- Location: UK
Post
by velaskez » Mon Jan 20, 2025 9:46 am
Yesterday during the FAI eSports series my LX showed me a message: LX will now shut down - and it did. Not ideal, to say the least

Does it keep a log anywhere, and would you want it?
Maciej - VLZ

-
h.kreso
- Posts: 114
- Joined: Sun Sep 21, 2008 11:49 pm
- Location: Croatia
Post
by h.kreso » Mon Jan 20, 2025 10:14 am
Users browsing this forum: No registered users