SR08/09 Day 11

22 · Post by 22 » Fri Feb 13, 2009 10:18 pm

yes, Condor password is case sensitive..

Freebird · Post by **Freebird** » Fri Feb 13, 2009 11:02 pm

Was cruising at altitude on AP when suddenly I had full left stick & rudder, quickly quit AP but couldn't get any control response & spun in

Must have been something to do with Condor as joystick tested fine under windows afterwards

22 · Post by 22 » Fri Feb 13, 2009 11:07 pm

send IGC pls, if you got tech issue, there is possibility dont count your flight to score.

Freebird · Post by **Freebird** » Fri Feb 13, 2009 11:16 pm

IGC uploaded already.

Redich · Post by **Redich** » Fri Feb 13, 2009 11:53 pm

22 wrote:it seems fixed...

Eeeh, what

I have not done anything else than loged on to my server and flown the task and then saved my file - I have not done anything else

Hope you can find the bug Merek. I go to sleep now but look in tomorow hope you have solved it then - nigth nigth!

(48 )

:EDIT: :EDIT: :EDIT: :EDIT: :EDIT: :EDIT: :EDIT: :EDIT: :EDIT: :EDIT:

Hah, problem solved

I saved a new IGC file from file LastTrack.ftr and tried upload this and yeaa it worked

130209.igc file was saved successfully as 48_day11.igc ...

Don't know what happend with the first IGC

cruiser · Post by **cruiser** » Sat Feb 14, 2009 12:06 am

Jon, I had similar issues with the new computer 2 years back. I traced it down to having to install a patch for dual core processors. Never had a problem since. Look into the support section.

About the task. It was really only a matter of luck of getting a thermal after tp1. I had none and has to scratch endlessly on the ridge, to be able to escape from the high ground.

Freebird · Post by **Freebird** » Sat Feb 14, 2009 12:54 am

Its a quad core & as far as I know there's no such patch the quads. It has behaved perfectly up until now though.

cruiser · Post by **cruiser** » Sat Feb 14, 2009 9:43 am

Still, take a look at the topic, its sticky.
There are also some other suggestions there

Freebird · Post by **Freebird** » Sat Feb 14, 2009 1:29 pm

I'm not going to say I have sorted the problem (yet) but checking through my system I found the SM bus had no drivers installed which is strange as I did a clean install of XP64 about 6 weeks ago & I always check the device manager when I have finished just to make sure there's no exclaimation marks. As this is the chipset driver then it does have an effect on the PCI bus & USB controllers as well as a few other important things

22 · Post by 22 » Sat Feb 14, 2009 4:02 pm

Results are online, all ppl without IGC got Crash, sry..

here are corrections:
Day 11
Std class
9,Crashed,Jon.Holland,123,G-RUSH,LS8,138.3 km, , ,0 p,0 p,,0 //tech issue
16,Crashed,Laszlo.Kormendi,TU,HA-4567,LS8,13.2 km, , ,0 p,0 p,,0 //unregistered

18m class
16,Crashed,BST.Ikarus,DDB,D-KSDB,ASG29,75.4 km, , ,0 p,0 p,,0 //unregistered
18,Crashed,John.Slowflyer,YES,NZ-1011,Ventus2cx,68.2 km, , ,3 p,0 p,,0 //unregistered
23,Crashed,Jan.Podolan,A22,ANDEL,LS10,54.1 km, , ,1 p,0 p,,0 //wrong class

S.Berx · Post by **S.Berx** » Sat Feb 14, 2009 8:52 pm

Hi marek,

Last night after the race when i wanted to up my igc i ran into the same problem as last week for the upload, it says there's an incorrect CN in the igc named S1, when i log into skyrace and crc i need to use s1, small s, yu changed it last week, prolly only on skyrace website, and since i changed my tz on crc again this week, it seems when i log in on crc with the smalls s1, it puts it the same way again for the skyrace login.
So if you could change the s into a big S again in the skyrace db i can upload my igc, but maybe change it in crc db aswell, to not be doin this still by day 20

Tx in advance and tx again for the company on tha latenight server for us europeans...

gz S1

22 · Post by 22 » Sat Feb 14, 2009 9:43 pm

hmm, did you change timezone between last and this week? I fixed your CN, so now you can upload IGC and I will repair results..

S.Berx · Post by **S.Berx** » Sat Feb 14, 2009 10:03 pm

jah, I changed it wednesday again to 24H UTC, difficult schedule last months...
And when I went to CRC to change it, I had to log in with s1 (small), what prolly was the way i regged first day, lil hickup on my part maybe.
So I think 'cuz of that it maybe changed it again for skyrace aswell when it registered the tz change on CRC.
It didnt seemed to matter on the old website that login was different to IGC CN, since problem only came since day10 and prolly xposed my wrong registring the first day.

So sry for the hassle and tx for the trouble...

22 · Post by 22 » Sat Feb 14, 2009 10:36 pm

thx for input I have feel I know, what is wrong, I will fix it untill next race day.

r montiel · Post by **r montiel** » Mon Feb 16, 2009 4:53 pm

Hi Marek, I think the CN in tye official website is case sensitive too. That´s why I think I can´t upload IGC files, because my CN is RMQ, and my user in Sky-Race website is rmq.

Could you please fix that. I have emailed my IGC to the sky-race address.

Thx in advance
Roberto Montiel

SR08/09 Day 11

Who is online