Condor

I have a system with two monitors and I am trying to
figure out how to have LK8000 run on the second monitor.
Anybody done this ??
I do have NEMA output set and on screen 8 devices are Condor
But still not working

OK got that one to work.

Now working on my friends. It is one of those 7" mini Chinese Netbooks
LK8000 works BUT the only connections are wifi, usb, or net cable.
I am trying to find a virtual com port emulator that can be installed on CE6.
and I need to know what kind of cable connection I need. coming from USB
at his computer.

Talking about LK8000, version 3 is out now!

Go grab it at: http://www.lk8000.it/download/software.html
Highlights in version 3: http://www.lk8000.it/new-20-features/hi ... f-v30.html
Changes from version 2.2: http://www.lk8000.it/new-20-features/wh ... 00-30.html

Yes v3 looks great but I still need to know how to go from PC to PC via USB cable or Net cable

Yes, the new version of LK8000 seems full of goodies.

However, after installing LK8000 version 3 on my Mio M400, it no longer will accept flight plan translations from Condor, using condor2nav-gui.exe. The LK version will no longer recognize XCM files, so the display won't be as pretty, unless you can find LKM files to replace them.

Mateuz w/ SourceForge is working on a new version of condor2nav-gui (version 4.0) to adjust to changes made to
LK8000 v3.0.

Maestro

Maestro wrote:Mateuz w/ SourceForge is working on a new version of condor2nav-gui (version 4.0) to adjust to changes made to
LK8000 v3.0.

Looks like he finished with work http://forum.condorsoaring.com/viewtopi ... 61#p135261

Maestro wrote: The LK version will no longer recognize XCM files, so the display won't be as pretty, unless you can find LKM files to replace them.

Most of the scenery here have LKM Dims to match up.
I have also created a lot of the cup files to include the
airports and be able to show them as airports. I can
post them if someone needs them. I am working on all
but it will take a little time. Version 3 works great.

Lighthorse wrote:Yes v3 looks great but I still need to know how to go from PC to PC via USB cable or Net cable

Use an USB/Parallel Adapter Cable and connect it with an Parallel /USB Adapter Cable.

Doesn't cost too much,

Frank

Frank Lukas wrote:

Lighthorse wrote:Yes v3 looks great but I still need to know how to go from PC to PC via USB cable or Net cable

Use an USB/Parallel Adapter Cable and connect it with an Parallel /USB Adapter Cable.

Doesn't cost too much,

Frank

I wonder ,, that might work , the problem is that the other PC is a mini 7" netbook
with WinCE 6 flashed. I put LK8000 on the mini, Worth a try

EDB wrote:http://gpsgate.com/products/gpsgate_client

Trying it
Asking for device driver