Well PPJ, that could be a point, my default.ini:PapaJules wrote:Mike
your UDP.ini in the Condor directory seems correct.
Now, you have to check 'default.ini' in your FCIS/Cfg directory
[General]
DebugLog=0
FpsVisible=0
TextFontSize=18
TextFontName=arial
Zoom=0.6
; System of measures (metric, imperial)
; MUST be set EQUAL with corresponding Condor settings
Units=Metric
[Window]
; Monitor
; Id of monitor to display meters on.
; If you don't know which monitor you should use then try different
; values and launch in fullscreen mode.
Monitor=1
; Mode
; 0 = Windowed
; 1 = Fullscreen
; 2 = Fullscreen Emulation (Windowed mode with size to fit screen)
Mode=0
; Border is only affected in windowed mode.
; Actual window width and height will be corrected to fit your values.
Border=0
; Topmost is only affected in windowed or emulation mode.
Topmost=1
; Following values affected only in windowed mode.
; Left and top are window offset on selected monitor.
; Width and Height are sizes of window
Top=350
Left=150
Width=1000
Height=360
[Connection]
ListenPort=55278
; instruments failure timeout (ms)
Timeout=1000
; UDP forwarding
ForwardEnabled=1
ForwardHost=127.0.0.1
; ListenPort and ForwardPort MUST be different.
ForwardPort=55279
Before I checked my default.ini now, I had "ForwardEnabled=0", but even after changing it, FCIS are still offline.
It seems we need more ideas
Mike
EDIT: OK! It runs. The problem was the patch 9 instead of 14