Another Condor use of Arduino

Interested in building your own home grown cockpit?

Moderators: Uros, OXO

Post Reply
eRock
Posts: 21
Joined: Wed May 30, 2012 11:15 pm

Another Condor use of Arduino

Post by eRock » Fri Jun 19, 2020 4:28 am

Hi all,
I guess this might be useful for this section.. e.g. one XCSoar each as glide computer for two persons glider simpit.

** A test to forward CondorSim NMEA data to multiple serial ports at 4800 BAUD
Use Arduino Pro Micro (clone), ebay 5V version
PL2302 https://core-electronics.com.au/usb-to- ... 303hx.html (currently NG for Win10, ok for other OS)

** Reference
https://www.arduino.cc/en/Tutorial/TwoPortReceive
https://github.com/Sackhorn/HC05-Blueto ... noProMicro
https://www.arduino.cc/en/Reference/SoftwareSerial

** Arduino Pro Micro:
Serial: 0 (RX) and 1 (TX). Used to receive (RX) and transmit (TX) TTL serial data using the ATmega32U4 hardware serial capability.
On the Micro, the "Serial" class refers to USB (CDC) communication; for HW TTL serial on pins 0 and 1, use the "Serial1" class.

** PL2303
Red Power. Not used in my test.
Black Ground
White RX
Green TX

** My clone Pro Micro can only run up 2 software serials in addition to the HW TTL serial at 4800 Baud before getting data messy which you can monitor the data in XCSoar
You do not have the required permissions to view the files attached to this post.
Image

Post Reply