Eyefinity 3 displays

Interested in building your own home grown cockpit?

Moderators: Uros, OXO

Post Reply
Edwinnow
Posts: 4
Joined: Fri Dec 30, 2011 7:26 pm
Location: Kent UK

Eyefinity 3 displays

Post by Edwinnow » Wed Apr 17, 2013 10:40 am

Hi Im trying to get 3 screens working, it seems the problem is that condor doesn't support enough resolution but im not sure.

if i set up eyefinity with 2 screens i can select a resolution that is acceptable in condor and the 2 displays work as one.

when i set up the 3rd display i am unable to select a display res that's low enough in the dispaly card settings and condor says unable to initialize direct3d, i am running win7 64 bit which has directx11 natively and i have installed directx 9c.

if i select a very low res in condor it loads but treats the 3 screens as duplicates )-:

Some people here seem to be running much higher resolutions and some say there is a limit of 1920x 4080?

Anybody got any ideas.

my set up is:

XFX radeon 6850
1x VGA running from dvi-d 2 vga splitter cable

1x VGA running from display port adapter

1x hdmi tv running direct from 2nd dvi-d socket (it also seems to work fine plugged direct in the hdmi slot.

Any help appreciated.

Thanks Ed.

phercek
Posts: 98
Joined: Sat Aug 11, 2012 6:48 pm

Re: Eyefinity 3 displays

Post by phercek » Sat Apr 20, 2013 12:39 pm

Looks like my response was lost while the forum was down.
Condor v1.x is DX7 application which limits it to at most 2048x2048.
Eyefinity setups do not work well with this limitation.
http://forum.condorsoaring.com/viewtopi ... 66#p138466


Post Reply