-
RaiderOne
- Posts: 509
- Joined: Wed Jul 27, 2005 4:26 pm
- Location: France - 14 Km in the W of Paris
-
Contact:
Post
by RaiderOne » Wed Mar 22, 2006 6:42 pm
OK Thx ... its working now !
But don't know what happend ... huh !

-
JJJ
- Posts: 1955
- Joined: Mon Aug 08, 2005 1:39 pm
- Location: Belgium - Balen
-
Contact:
Post
by JJJ » Wed Mar 22, 2006 6:43 pm
dont know it to i think if you use tsu2.tsutrecht.nl:8760 isint the right adres anymore
CN: JJJ
REG: D-3547
-
Pit_R
- Posts: 1359
- Joined: Mon Feb 27, 2006 7:16 pm
Post
by Pit_R » Mon Apr 03, 2006 11:34 pm
Hmmm
TS server not working when overload?

During LLC events I cannot join...
Now - without problems. (I'm using IP from this thread)
No matter where you go... There you are...
:::
: Please use this envelope

to send me a PM.
-
TimKuijpers
- Posts: 3214
- Joined: Sun Apr 24, 2005 12:33 am
- Location: The Netherlands
Post
by TimKuijpers » Tue Apr 04, 2006 12:06 am
Same here, looks like the server has a maximum amount of slots or something.
Think positive, flaps negative.
-
Pierre.v.d.Elshout
- Posts: 288
- Joined: Mon Nov 28, 2005 9:02 am
Post
by Pierre.v.d.Elshout » Tue Apr 04, 2006 12:28 pm
I've the same problem for a while...can't connect to it anymore.
Glider-Equipment.nl
-
Slow_and_Low
- Posts: 741
- Joined: Fri Sep 02, 2005 9:13 am
- Location: Netherlands
Post
by Slow_and_Low » Tue Apr 04, 2006 2:00 pm
The server is moved to a new location and has become a paid service. We could use the old server as long as it was available. Apparently the service is not available anymore....
-
markjt
- Posts: 1256
- Joined: Fri May 06, 2005 10:10 am
- Location: England
Post
by markjt » Tue Apr 04, 2006 2:41 pm
@SL
If you can give me some stats I'll see if it is possible to make a TS channel available on the FREDO TS server:
When is TS needed? Is this thread mainly about TS for LLC races?
How many pilots used to join the TS for LLC?
Do you know which codec and bit-rate is acceptable for most users? (e.g. FREDO uses Speex 12.3 kbit for TeamUK and small user numbers).
Mark
Reg-#: G-1956
Comp-#: MT
-
Slow_and_Low
- Posts: 741
- Joined: Fri Sep 02, 2005 9:13 am
- Location: Netherlands
Post
by Slow_and_Low » Tue Apr 04, 2006 3:50 pm
Hi Mark,
The number was roughly 25-30 connections. Speex 12.3 would be sufficient. And it is used on thursday evenings from 19:45 CEST and Sunday evenings from 20:15 CEST.
It was arranged in such a way that there was a permanent channel per server, but users could create their own temp channel as well.
Password could be set to the LLC join password.
Thanks in advance.

-
markjt
- Posts: 1256
- Joined: Fri May 06, 2005 10:10 am
- Location: England
Post
by markjt » Tue Apr 04, 2006 6:55 pm
OK, I will set up the FREDO TS server for the next LLC (day 44, 06/04/06).
The default channel will allow sub-channel creation.
The TS server IP address is:
194.164.46.52
(default port)
The TS server will allow anonymous access. The server password will be the same as the standard LLC server password. But the password will only be set to this on Thursday at about 19:00 CET.
If this goes OK I will do the same for the rest of the LLC tasks.
Mark
Reg-#: G-1956
Comp-#: MT
-
markjt
- Posts: 1256
- Joined: Fri May 06, 2005 10:10 am
- Location: England
Post
by markjt » Thu Apr 06, 2006 7:16 pm
Change of plan!
The FREDO TeamSpeak server will have to use a different password than the LLC one!
JJ, you know the server password.... can you please share it with anyone who wants to join, BUT NOT on the forum please!
Mark
Reg-#: G-1956
Comp-#: MT
-
JJJ
- Posts: 1955
- Joined: Mon Aug 08, 2005 1:39 pm
- Location: Belgium - Balen
-
Contact:
Post
by JJJ » Thu Apr 06, 2006 7:36 pm
hmm Mark do you wanna give me the IP adres from the server then because that i dont know but the pasword is (i know but i dont tell:))
CN: JJJ
REG: D-3547
-
markjt
- Posts: 1256
- Joined: Fri May 06, 2005 10:10 am
- Location: England
Post
by markjt » Thu Apr 06, 2006 10:29 pm
Duuhhh.... sorry guys, I thought I'd already posted the IP
I'll get it right for Sunday.
FREDO TS server is:
194.164.46.52
Mark
Reg-#: G-1956
Comp-#: MT
Users browsing this forum: No registered users