I continue to use iGlide regularly without any problems. I'm a Mac user and run Condor under Boot Camp. I recently moved to Win10 in Boot Camp, and getting iGlide to connect to it took a little more fiddling than with WinXP, but it has been working once I poked around a bit.
You're seeing data out the serial port, but that doesn't necessarily mean you're getting data onto your local WiFi, though the "Connected" status in iGlide seems to indicate it's seeing the HWSerial port WiFi connection and login. If your router has some way of showing WiFi traffic you might see if there's any traffic through the socket that's serving the Condor data. Also, I Telneted to the correct HWSerial port socket on the Windows machine to see if the Condor data was coming through that port. Initially it wasn't and I had to do some more fiddling in the HWSerial setup to get it to be served. I don't recall now what that was.
Good luck.
Using iGlide with Condor
Re: Using iGlide with Condor
Thx for your replies. I will try some more troubleshooting.
Re: Using iGlide with Condor
i found a new detailed guide on butterfly website, just follow it step by step and will work perfectly!
http://www.air-avionics.com/air/index.p ... interfaces
the only thing that i don't like is that you can not see the task that you prepare in condor, so you need to do the same on iglide before your flying session...so enjoy
http://www.air-avionics.com/air/index.p ... interfaces
the only thing that i don't like is that you can not see the task that you prepare in condor, so you need to do the same on iglide before your flying session...so enjoy
Re: Using iGlide with Condor
Unfortunately, this link is blind or at least I can't find the announced documentation.
Could anyone please summarise the step by step description for a new iGlide, which does not have Wifi connection any longer but only the AIR Connect.
Thanks!
Could anyone please summarise the step by step description for a new iGlide, which does not have Wifi connection any longer but only the AIR Connect.
Thanks!
Re: Using iGlide with Condor
I suggest the best way is ask Air Avionicsvol907 wrote:Unfortunately, this link is blind or at least I can't find the announced documentation.
Could anyone please summarise the step by step description for a new iGlide, which does not have Wifi connection any longer but only the AIR Connect.
Thanks!
support@air-avionics.com
Chris Wedgwood,
Condor Team
Condor Team
Re: Using iGlide with Condor
Back again, this time happy to report it works! I had contacted air avionics even before posting last time here. Yesterday I got the answer. They have a document for Simulator interfaces, but it is not accessible at their web site right now.OXO wrote:I suggest the best way is ask Air Avionics
support@air-avionics.com
I am using Condor on a Windows 10 PC and iGlide on an iPad pro with ios11. What I needed to change compared to losnively's were good Howto was the following:
- HW VSP3 -> Register "Settings": only check "TCP server mode" and "Purge buffers when Port is opened"
- HW VSP3 -> Register "Virtual Serial Port": IP address "0.0.0.0"
- iGlide: password does not need to be identical to HW VSP's. I used SIMULATOR.
Good luck!
best regards
David