When I look at your video card and your monitors I think it's not working. Your RTX 4060 Ti can process a maximum of 7680 pixels in width. The three LG screens together measure 10320 pixels in width. I think that is the reason why there are not 3 monitors visible. As Wiek already indicates, Condor c...

I assumeyou use 3 separate cables connected to your videocard for each monitor. :?: And again, first configure the 3 monitor settings in Windows properly. Right click in monitor, select display settings. When you get there you should see three screens 1, 2 and 3. If not, you are doing something wron...

Two graphic cards?????? Just folow the instructions and it will work.
Can you use 3 monitors with windows?

Next

Hi, First of all, next time post a question in the right topic. First set the three monitors in windows so that the mouse cursor moves correctly from left to right. Open Condor, go to setup>options en set degrees, this is after trying yourself which one is best for your situation. Return to Graphics...

Try to hit windows key in flight, some times it is necessary to do this several times.

Day 20 2024. A few km before the last turning point, a complete freeze of Condor.

I don’t need any more photos.
Jacub Potměšil from HpH helped me with a lot of useful photos and info.
I can’t believe the are so helpful, I can move on now.

Yes Tanks

The project is on hold. I still don't have enough info to make a good looking interior shell without seat cushions and proper placement of all handles. I also need pictures of the space behind the rear seat and the wing bolts en locks. Does a glider pilot from the Netherlands know of a club in the N...

Progress
Is there anyone who can help me with detailed photos of the entire cockpit, front and rear.

You can find the solution here, I had the same problems and it worked for me
Rivive is not necessary

Thanks to VV_MSGA

viewtopic.php?f=43&t=21749

Everything works fine now

Hi VV_MGSA,

Thanks for the reply.
Your solution worked once and the next time I started Condor the error message was back.
Do you have to repeat the process every time or was it finally solved?
​