I am struggling to get a smoothly sloped runway. The srtm data was a bit off, so I tried using the smoothing tool in the Landscape Editor, however this resulted in lots of "pimple-like" mini hills on the runway. I could not get a smooth sloped surface. The real runway has about 10 meters of slope from one end of the runway to the other.
I then tried to just flatten the entire runway out, again using the smooth tool, and now it is super bumpy - both the tow plane and the glider are jumping all over the place on take off - and also the tow plane's wheels are clipping into the surface.
Note that I have not yet created any airport objects (the G and O objects) - it is just the base height map and image texture. My understanding is that the runway G object is not the actual poly that the planes interact with - is that correct?
Advice for making a smooth sloped runway?
Advice for making a smooth sloped runway?
You do not have the required permissions to view the files attached to this post.
- EDB
- Posts: 1575
- Joined: Mon Oct 31, 2011 1:17 am
- Location: The Netherlands, Europe Continent, Earth Planet, Milky Way Galaxy, Virgo Super Cluster
Re: Advice for making a smooth sloped runway?
Make the flattened area bigger.
Re: Advice for making a smooth sloped runway?
I assume sloped runways are not possible in Condor?
I finally got a somewhat smooth sloped surface, however the tow plane does not seem to use the terrain polys at all - while my glider does, but it is still bouncing all over the place.
When taking off uphill, the tow plane clips into the surface like crazy... see attached screen shots...
If sloped runways are supported and I am doing something wrong, would love some ideas how to implement them. If sloped runways are not supported, would love to have this feature, as I am hoping to use Condor as a teaching tool and my home airport has a pretty gnarly sloped runway.
I finally got a somewhat smooth sloped surface, however the tow plane does not seem to use the terrain polys at all - while my glider does, but it is still bouncing all over the place.
When taking off uphill, the tow plane clips into the surface like crazy... see attached screen shots...
If sloped runways are supported and I am doing something wrong, would love some ideas how to implement them. If sloped runways are not supported, would love to have this feature, as I am hoping to use Condor as a teaching tool and my home airport has a pretty gnarly sloped runway.
You do not have the required permissions to view the files attached to this post.
Re: Advice for making a smooth sloped runway?
Ono more with bad clipping...
You do not have the required permissions to view the files attached to this post.
- EDB
- Posts: 1575
- Joined: Mon Oct 31, 2011 1:17 am
- Location: The Netherlands, Europe Continent, Earth Planet, Milky Way Galaxy, Virgo Super Cluster
Re: Advice for making a smooth sloped runway?
Condor runways are flat only.
Re: Advice for making a smooth sloped runway?
Darn. That's a bummer.
Hopefully this is something that can be addressed in the future.
-
- Posts: 64
- Joined: Tue Mar 27, 2012 9:23 pm
Re: Advice for making a smooth sloped runway?
The runway at Megeve in Jura_Mont Blanc scenery is not level. The actual airstrip has a 10% up slope. Apparently to simulate this the runway has two levels connected by a slope. Makes it difficult to land.
Eric Kollgaard
Eric Kollgaard